Analog Devices ADG5404F Evaluation Board EVAL-ADG5404FEBZ

RS Stock No.: 898-7289Brand: Analog DevicesManufacturers Part No.: EVAL-ADG5404FEBZ
brand-logo

Technical Document

Specifications

Kit Classification

Evaluation Board

Featured Device

ADG5404F

Product details

Evaluation Board for ADG5404F Multiplexer

The EVAL-ADG5404FEBZ from Analog Devices is an evaluation board for the ADG5404F Multiplexer. It is designed to evaluate the functionality of the ADG5404F device.
The ADG5404F is a 4-channel multiplexer with overvoltage fault detection and protection. The ADG5404F is mounted in the centre of the evaluation board.
3 screw terminals are used to power the device with an optional 4th terminal providing a user-defined digital voltage. Alternatively the user can utilise an LDO regulator for 5 V digital voltage control and supply for the LED. The LED is used to represent the fault status of the switch.

Additional equipment required; ±22 V DC voltage source (dual supply), 44 V DC voltage source (single supply), optional digital voltage source (3-5 V), analogue signal source, voltage measure e.g. digital multi-meter.

Features of the EVAL-ADG5404FEBZ evaluation board:
ADG5404F multiplexer with overvoltage protection
LED for visual indication of overvoltage
Parallel interface compatible with 3 V logic
LDO for optional digital supply and control

Switches and Multiplexers, Analog Devices

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

P.O.A.

Analog Devices ADG5404F Evaluation Board EVAL-ADG5404FEBZ

P.O.A.

Analog Devices ADG5404F Evaluation Board EVAL-ADG5404FEBZ
Stock information temporarily unavailable.

Technical Document

Specifications

Kit Classification

Evaluation Board

Featured Device

ADG5404F

Product details

Evaluation Board for ADG5404F Multiplexer

The EVAL-ADG5404FEBZ from Analog Devices is an evaluation board for the ADG5404F Multiplexer. It is designed to evaluate the functionality of the ADG5404F device.
The ADG5404F is a 4-channel multiplexer with overvoltage fault detection and protection. The ADG5404F is mounted in the centre of the evaluation board.
3 screw terminals are used to power the device with an optional 4th terminal providing a user-defined digital voltage. Alternatively the user can utilise an LDO regulator for 5 V digital voltage control and supply for the LED. The LED is used to represent the fault status of the switch.

Additional equipment required; ±22 V DC voltage source (dual supply), 44 V DC voltage source (single supply), optional digital voltage source (3-5 V), analogue signal source, voltage measure e.g. digital multi-meter.

Features of the EVAL-ADG5404FEBZ evaluation board:
ADG5404F multiplexer with overvoltage protection
LED for visual indication of overvoltage
Parallel interface compatible with 3 V logic
LDO for optional digital supply and control

Switches and Multiplexers, Analog Devices