Murata MGK Non-Isolated DC-DC Converter, 1.8V dc/ 20A Output, 8 → 14 V dc Input, 36W, Surface Mount, +85°C Max

Murata Mono Block 20A DC-DC Converter

The MYMGK1R820 series from Murata are miniature Mono Block type Non-isolated Point-of-Load (PoL) DC-DC power converters for embedded applications. The tiny form factor measure only 10.5 x 9.0 x 5.6 mm. Applications include powering FPGA/CPU’s, Datacom/telecom systems, Distributed Bus Architectures (DBA), programmable logic and mixed voltage systems.
The converters have input voltage ranges of 4.5 V dc to 5.5 V dc (*FRSR) or 8.0 V dc to 14 V dc (*ERSR) and a maximum output current of 20 Amps. Based on a fixed frequency synchronous buck converter switching topology, this high-power conversion efficient PoL module features programmable output voltage 0.7 V to 1.8 V, On/Off control and Power Good signal output. These converters also include under voltage lock out UVLO), output short circuit protection and overcurrent protection.

Features and Benefits

• Programmable output voltage from 0.7-1.8 V dc
• Up to 20 Amps of output current
• Quick response to load change
• Ultra-small surface mount package
• 10.5 x 9.0 x 5.6 mm
• High efficiency of 89.2 %(*FRSR), 87.8 %(*ERSR)
• Outstanding thermal derating performance
• Overcurrent protection
• On/Off control (Positive logic)
• Power Good signal
• RoHS-6 hazardous substance compliance
• High Reliability / Heat Shock Testing
• 700 cycle (-40 to +125 °C)