STMicroelectronics SPBTLE-RF Bluetooth Chip 4.1
Technical Document
Specifications
Brand
STMicroelectronicsBluetooth Version
4.1
Maximum Output Power
+4dBm
Receiver Sensitivity
-88dBm
Supported Bus Interfaces
GAP, GATT, L2CAP, LL, RFPHY, SM
Supported I/O Interfaces
IRQ, RESET, SPI
Dimensions
13.5 x 11.5 x 2mm
Height
2mm
Length
13.5mm
Maximum Operating Temperature
+85 °C
Minimum Operating Temperature
-40 °C
Width
11.5mm
Product details
SPBTLE-RF, Bluetooth Smart V4.1 Very Low Power Module
The SPBTLE-RF is an easy ready-to-use Bluetooth v4.1 compliant. This Smart master/slave mode network processor module supports multiple roles simultaneously. It can act at the same time as Bluetooth Smart sensor and hub device.
The entire Bluetooth Smart stack and protocols are embedded into SPBTLE-RF B-SmarT module. A standard SPI interface establishes the communication with an external host microcontroller.
The SPBTLE-RF can be powered directly with a standard 3 V coin cell battery.
Bluetooth Version 4.1 compliant
Embedded Bluetooth low energy profiles: GAP, GATT, SM, L2CAP, LL, RFPHY
Embedded ST BlueNRG-MS
Transmitter Power +4 dBm
Receiver sensitivity -88 dBm
SPI, IRQ, and RESET Host interface
AES security co-processor
1.7 V to 3.6 V operating supply voltage
Dimensions 13.5 x 11.5 x 2 mm
Bluetooth - STMicroelectronics
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical Document
Specifications
Brand
STMicroelectronicsBluetooth Version
4.1
Maximum Output Power
+4dBm
Receiver Sensitivity
-88dBm
Supported Bus Interfaces
GAP, GATT, L2CAP, LL, RFPHY, SM
Supported I/O Interfaces
IRQ, RESET, SPI
Dimensions
13.5 x 11.5 x 2mm
Height
2mm
Length
13.5mm
Maximum Operating Temperature
+85 °C
Minimum Operating Temperature
-40 °C
Width
11.5mm
Product details
SPBTLE-RF, Bluetooth Smart V4.1 Very Low Power Module
The SPBTLE-RF is an easy ready-to-use Bluetooth v4.1 compliant. This Smart master/slave mode network processor module supports multiple roles simultaneously. It can act at the same time as Bluetooth Smart sensor and hub device.
The entire Bluetooth Smart stack and protocols are embedded into SPBTLE-RF B-SmarT module. A standard SPI interface establishes the communication with an external host microcontroller.
The SPBTLE-RF can be powered directly with a standard 3 V coin cell battery.
Bluetooth Version 4.1 compliant
Embedded Bluetooth low energy profiles: GAP, GATT, SM, L2CAP, LL, RFPHY
Embedded ST BlueNRG-MS
Transmitter Power +4 dBm
Receiver sensitivity -88 dBm
SPI, IRQ, and RESET Host interface
AES security co-processor
1.7 V to 3.6 V operating supply voltage
Dimensions 13.5 x 11.5 x 2 mm