Double sided backplanes 3U high with pth for high reliability which will accept DIN41612 connectors. Suitable for use with subracks to IEC297-3.
96//96-way suitable for high speed logic systems where screening is required between each signal line. Can also be used for slower applications with a maximum of 84 seperate signal lines by breaking the 0V commoning line in the end position
2 insulated mounting strips
PC Compatible Prototyping Boards
Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m (1 oz/ft). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 in.). Diameter holes are pre-drilled on a 2.54 mm (0.1 in.) matrix.
Incorporates, on the component side of the card, a colander ground plane for maximum screening and glitch free high speed operation, and complete solder mask protection.
If you have spotted an error in this product's information please tell us about it below.
RS Stock No.: 435-068
Please tell us the nature of the error
Please provide us with specific detail about the error.