Dold Thermistor Motor Protection Monitoring Relay, SPDT, DIN Rail
Technical Document
Specifications
Brand
DoldMonitoring Application
Thermistor motor temperature protection
Contact Configuration
SPDT
Mounting Type
DIN Rail
Time Delay
<20ms
Series
MK 9052
Height
82mm
Length
99mm
Operating Temperature Range
+60°C
Minimum Operating Temperature
-20°C
Width
22.5mm
Maximum Operating Temperature
+60°C
Dimensions
99 x 22.5 x 82mm
Country of Origin
Malta
Product details
MK9052 - Thermistor motor protection relay
1 input for thermistors or bi-metallic contacts
Wire breakage detection in the sensor circuit
LED for switching status
Rest current principle
1 changeover
22.5 mm overall width
The MK9052 motor protection relay is used to prevent thermal overloads in motors (for example as caused by high switching frequencies, heavy start-up loads, single phase operation, interrupted cooling, high ambient temperature).
Special thermistors (PTC resistors) developed specifically for motor protection are used as temperature sensors. Up to 6 sensors can be switched in sequence; when a fixed resistance level is reached, they cause the output relay of the MK9052 to de-energise.
Stock information temporarily unavailable.
Please check again later.
AED 593.40
Each (ex VAT)
AED 623.07
Each (inc. VAT)
1
AED 593.40
Each (ex VAT)
AED 623.07
Each (inc. VAT)
1
Technical Document
Specifications
Brand
DoldMonitoring Application
Thermistor motor temperature protection
Contact Configuration
SPDT
Mounting Type
DIN Rail
Time Delay
<20ms
Series
MK 9052
Height
82mm
Length
99mm
Operating Temperature Range
+60°C
Minimum Operating Temperature
-20°C
Width
22.5mm
Maximum Operating Temperature
+60°C
Dimensions
99 x 22.5 x 82mm
Country of Origin
Malta
Product details
MK9052 - Thermistor motor protection relay
1 input for thermistors or bi-metallic contacts
Wire breakage detection in the sensor circuit
LED for switching status
Rest current principle
1 changeover
22.5 mm overall width
The MK9052 motor protection relay is used to prevent thermal overloads in motors (for example as caused by high switching frequencies, heavy start-up loads, single phase operation, interrupted cooling, high ambient temperature).
Special thermistors (PTC resistors) developed specifically for motor protection are used as temperature sensors. Up to 6 sensors can be switched in sequence; when a fixed resistance level is reached, they cause the output relay of the MK9052 to de-energise.