Technical Document
Specifications
Brand
KnipexOperation
Hand
Crimp Tool Type
Crimping Tool
Overall Length
180 mm
Wire Size (mm²)
0.08 → 16mm²
Wire Size (AWG)
28 → 6AWG
Ratcheting
Yes
Connector Type
Ferrule
Country of Origin
Germany
Product details
97 53 04 crimp tool
High quality Knipex crimping tool for bootlace ferrule. This handheld crimp tool is designed to compress pieces of material together with the size of 0.08 – 10mm² with an added feature allowing you to crimp up to 16mm². The transmission ratio of this crimping tool has been well designed and therefore hand friendly providing a comfortable grip and allowing the user to crimp easily with the perfect end result. The crimping can be easily carried out leaving a hexagonal profile on the crimped end sleeves or ferrules making it much easier if the connection dimensions are tight. When crimping from 10mm to 16mm this will leave a square compression on the end sleeves for ideal contact surfaces in the clap connection. This crimping tool also automatically adjusts to the size of the bootlace ferrule to make sure accurate work is performed with each crimp. This feature allows the user not to spend time measuring the force when crimping because the crimping tool integral lock with release mechanism ensures the right amount of pressure automatically reaches the bootlace ferrule.
Features and Benefits
Self-adjusting wire end ferrule tool with side entry
Adjusts automatically to different cable cross-sections
Produces a hexagonal crimp profile
Optimum positioning of contact surfaces in the clamp connection for confined connection dimensions
Automatic lock for reliable crimping in accordance with DIN standards (unlockable)
Crimp pressure is set and calibrated in the factory
Low-effort lever mechanism
Easy-to-use shape with ergonomic handles
Suitable in particular for all twin end sleeves (ferrules) up to 2 x 6 mm² or 2 x AWG 8
Typical Applications
Crimping tools can be used for a variety of applications:-
Maintenance & repair
Electrical Installations
Cable assemblies
How to maintain the product?
To maintain a good function and long life: Axles and other movable parts should be regularly lubricated.
Lubrication* is recommended at least every 10,000 cycles whenever tool is exposed to dirt or other contaminants.
Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly
*Use a light mineral-free oil
Stock information temporarily unavailable.
Please check again later.
AED 872.20
Each (ex VAT)
AED 915.81
Each (inc. VAT)
1
AED 872.20
Each (ex VAT)
AED 915.81
Each (inc. VAT)
1
Technical Document
Specifications
Brand
KnipexOperation
Hand
Crimp Tool Type
Crimping Tool
Overall Length
180 mm
Wire Size (mm²)
0.08 → 16mm²
Wire Size (AWG)
28 → 6AWG
Ratcheting
Yes
Connector Type
Ferrule
Country of Origin
Germany
Product details
97 53 04 crimp tool
High quality Knipex crimping tool for bootlace ferrule. This handheld crimp tool is designed to compress pieces of material together with the size of 0.08 – 10mm² with an added feature allowing you to crimp up to 16mm². The transmission ratio of this crimping tool has been well designed and therefore hand friendly providing a comfortable grip and allowing the user to crimp easily with the perfect end result. The crimping can be easily carried out leaving a hexagonal profile on the crimped end sleeves or ferrules making it much easier if the connection dimensions are tight. When crimping from 10mm to 16mm this will leave a square compression on the end sleeves for ideal contact surfaces in the clap connection. This crimping tool also automatically adjusts to the size of the bootlace ferrule to make sure accurate work is performed with each crimp. This feature allows the user not to spend time measuring the force when crimping because the crimping tool integral lock with release mechanism ensures the right amount of pressure automatically reaches the bootlace ferrule.
Features and Benefits
Self-adjusting wire end ferrule tool with side entry
Adjusts automatically to different cable cross-sections
Produces a hexagonal crimp profile
Optimum positioning of contact surfaces in the clamp connection for confined connection dimensions
Automatic lock for reliable crimping in accordance with DIN standards (unlockable)
Crimp pressure is set and calibrated in the factory
Low-effort lever mechanism
Easy-to-use shape with ergonomic handles
Suitable in particular for all twin end sleeves (ferrules) up to 2 x 6 mm² or 2 x AWG 8
Typical Applications
Crimping tools can be used for a variety of applications:-
Maintenance & repair
Electrical Installations
Cable assemblies
How to maintain the product?
To maintain a good function and long life: Axles and other movable parts should be regularly lubricated.
Lubrication* is recommended at least every 10,000 cycles whenever tool is exposed to dirt or other contaminants.
Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly
*Use a light mineral-free oil