Weller MG130 Kit 2 Sloped Nozzle, 100 → 240V ac Solder Fume Extractor, Fine Dust Filter F7; HEPA Filter H13 &
Technical Document
Specifications
Speed Setting
Yes
Maximum Users
2
Remote Control
No
Filter Full Alarm
Yes
ESD Safe
Yes
Knob Diameter
39mm
Manufacturer Part No.
DRA1-CX240D5-B
Plug Type
Type C - EuroPlug to Type G - British 3-pin
Extraction Type
Volume
Maximum Airflow Rate
140m³/h
Noise Level
54dB(A)
Filter Type
Fine Dust Filter F7; HEPA Filter H13 & Wide Band Gas Filter
Depth
210mm
Voltage Rating
100 → 240V ac
Wattage
100W
Weight
11kg
Height
500mm
Width
460mm
Pack Quantity
54
Brand
WellerCountry of Origin
Hungary
Product details
Megger MIT 430 mk2 Series Insulation & Continuity Testers
Meggers MIT430/2 Series of insulation and continuity testers are designed for testing electrical installation and specialist applications where accurate, reliable and safe testing is essential. Combining the latest range of measurement techniques with new instrument design to provide a state-of-the-art tester that is compact and comfortable to hold. Featuring a redesigned case, back-stand and 6 cell battery compartment with separate fuse access. All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating, providing an almost indestructible case.
All primary results are displayed in the larger digital display and repeated on the analogue arc. Auxiliary test information such as frequency, leakage current, insulation or circuit voltage is displayed in the smaller secondary digital display. A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps. Where application- specific test voltages are required that do not appear in the standard ranges.
Continuity testing is now faster, a single auto-ranging 0.01 Ω to 1.0 MΩ function replaces the "ohms" and "k ohms" ranges. Retained are the 200 mA and 20 mA test options.
Typical Applications include:- Manufacturing/production line goods, electrostatic measurement, component testing, battery powered traction and letting equipment, commercial avionics and military land, marine and air communications.
Stabilised insulation test voltage
600 V TRMS AC and DC voltage measurement
Live circuit detection and protection
CAT IV 600 V & IP54
Weatherproof, rated to IP54
Test result storage and Bluetooth® downloading available
Rechargeable options for mains and car charging available
Battery Requirements: 6 AA Alkaline or Nickel Metal Hydride (NIMH)
Supplied with
Hard carry case complete with red/black silicone test lead set with probes, 1 red & 1 black crocodile clip, 1 SP5 Remote Switch Probe, information CD and 6 x AA Alkaline Batteries
Standards
EC61010 and EN 61557
Stock information temporarily unavailable.
Please check again later.
AED 6,870.10
Each (ex VAT)
AED 7,213.60
Each (inc VAT)
1
AED 6,870.10
Each (ex VAT)
AED 7,213.60
Each (inc VAT)
1
Technical Document
Specifications
Speed Setting
Yes
Maximum Users
2
Remote Control
No
Filter Full Alarm
Yes
ESD Safe
Yes
Knob Diameter
39mm
Manufacturer Part No.
DRA1-CX240D5-B
Plug Type
Type C - EuroPlug to Type G - British 3-pin
Extraction Type
Volume
Maximum Airflow Rate
140m³/h
Noise Level
54dB(A)
Filter Type
Fine Dust Filter F7; HEPA Filter H13 & Wide Band Gas Filter
Depth
210mm
Voltage Rating
100 → 240V ac
Wattage
100W
Weight
11kg
Height
500mm
Width
460mm
Pack Quantity
54
Brand
WellerCountry of Origin
Hungary
Product details
Megger MIT 430 mk2 Series Insulation & Continuity Testers
Meggers MIT430/2 Series of insulation and continuity testers are designed for testing electrical installation and specialist applications where accurate, reliable and safe testing is essential. Combining the latest range of measurement techniques with new instrument design to provide a state-of-the-art tester that is compact and comfortable to hold. Featuring a redesigned case, back-stand and 6 cell battery compartment with separate fuse access. All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating, providing an almost indestructible case.
All primary results are displayed in the larger digital display and repeated on the analogue arc. Auxiliary test information such as frequency, leakage current, insulation or circuit voltage is displayed in the smaller secondary digital display. A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps. Where application- specific test voltages are required that do not appear in the standard ranges.
Continuity testing is now faster, a single auto-ranging 0.01 Ω to 1.0 MΩ function replaces the "ohms" and "k ohms" ranges. Retained are the 200 mA and 20 mA test options.
Typical Applications include:- Manufacturing/production line goods, electrostatic measurement, component testing, battery powered traction and letting equipment, commercial avionics and military land, marine and air communications.
Stabilised insulation test voltage
600 V TRMS AC and DC voltage measurement
Live circuit detection and protection
CAT IV 600 V & IP54
Weatherproof, rated to IP54
Test result storage and Bluetooth® downloading available
Rechargeable options for mains and car charging available
Battery Requirements: 6 AA Alkaline or Nickel Metal Hydride (NIMH)
Supplied with
Hard carry case complete with red/black silicone test lead set with probes, 1 red & 1 black crocodile clip, 1 SP5 Remote Switch Probe, information CD and 6 x AA Alkaline Batteries
Standards
EC61010 and EN 61557