Megger Insulation Testers

Select quantity

Megger Insulation Tester Accessory

RS Stock No. 193-8419

Brand Megger

Accessory Type: Temperature Probe
Category: Insulation Tester Accessories
For Use With: MTR105 Rotating Machine Tester

AED 503.33

in stock now

Select quantity

Megger 1008-022 Insulation Tester HV Test Lead Set Lead, For Use With Insulation Resistance Testers

RS Stock No. 189-1912

Brand Megger

Accessory Type: Lead Set
Category: Insulation Tester Accessories
For Use With: Insulation Resistance Testers

AED 845.32

in stock now

Select quantity

Megger 1012-063 Insulation Tester Case Case, For Use With MTR105 Rotating Machine Tester

RS Stock No. 193-8411

Brand Megger

Accessory Type: Soft Pouch
Category: Insulation Tester Accessories
For Use With: MTR105 Rotating Machine Tester

AED 452.66

in stock now

Select quantity

Megger 1011-929 Insulation Tester Probe Probe, For Use With MTR105 Rotating Machine Tester

RS Stock No. 193-8412

Brand Megger

Accessory Type: Probe Leadset
Category: Insulation Tester Accessories
For Use With: MTR105 Rotating Machine Tester

AED 404.40

in stock now

Select quantity

Megger 1012-064 Insulation Tester Pin Probe Pins, For Use With MTR105 Rotating Machine Tester

RS Stock No. 193-8413

Brand Megger

Accessory Type: Probe Pins
Category: Insulation Tester Accessories
For Use With: MTR105 Rotating Machine Tester

AED 45.78

in stock now

Select quantity

Megger 1011-928 Insulation Tester Crocodile Clip Crocodile Clip, For Use With MTR105 Rotating Machine Tester

RS Stock No. 193-8414

Brand Megger

Accessory Type: Clip Leadset
Category: Insulation Tester Accessories
For Use With: MTR105 Rotating Machine Tester

AED 364.24

in stock now

Select quantity

Megger 1012-069 Insulation Tester Crocodile Clip Crocodile Clip, For Use With MTR105 Rotating Machine Tester

RS Stock No. 193-8415

Brand Megger

Accessory Type: Grabber Clip
Category: Insulation Tester Accessories
For Use With: MTR105 Rotating Machine Tester

AED 328.23

in stock now

Select quantity

Megger 1012-066 Insulation Tester Probe Probe, For Use With MTR105 Rotating Machine Tester

RS Stock No. 193-8416

Brand Megger

Accessory Type: Test Probe Set
Category: Insulation Tester Accessories
For Use With: MTR105 Rotating Machine Tester

AED 101.90

in stock now

Select quantity

Megger MIT1025 Insulation Tester, 500 V Min, 10000 V Max, 20 TΩ

RS Stock No. 763-9264

Brand Megger

Power Source: Battery, Mains
Safety Category: CAT IV 600V
Tester Type: Insulation Tester

AED 30.131.71

in stock now

Select quantity

Megger MIT515 Insulation Tester, 250 V Min, 5000 V Max CAT IV

RS Stock No. 763-9267

Brand Megger

Minimum Operating Temperature: -20°C
Power Source: Battery, Mains
Safety Category Level: CAT IV

AED 20.042.00

in stock now

Select quantity

Megger MIT525 Insulation Tester, 250 V Min, 5000 V Max, 20 TΩ 1000 V CAT II, 600 V CAT III

RS Stock No. 763-9260

Brand Megger

Battery Type: Lithium-Ion
Plug Type: Type C - European Plug, Type G - British 3-pin
Tester Type: Insulation Tester

AED 23.130.45

in stock now

Select quantity

Megger 1002-643 Insulation Tester HV Test Lead Set Lead, For Use With MIT510/2

RS Stock No. 763-9273

Brand Megger

Accessory Type: HV Test Lead Set
Category: Insulation Tester Accessories
For Use With: MIT510/2

AED 1.473.81

in stock now

Select quantity

Megger 1007-156 Insulation Tester Probe Probe, For Use With MIT320 Series, MIT330 Series

RS Stock No. 851-3406

Brand Megger

Accessory Type: Switch Probe
Category: Insulation Tester Accessories
For Use With: MIT320 Series, MIT330 Series

AED 528.49

in stock now

Select quantity

Megger 1012-065 Insulation Tester Probe Probe, For Use With MTR105 Rotating Machine Tester

RS Stock No. 193-8418

Brand Megger

Accessory Type: Test Probe Set
Category: Insulation Tester Accessories
For Use With: MTR105 Rotating Machine Tester

AED 101.90

in stock now

Select quantity

Megger MIT1525 Insulation Tester, 1000 V Min, 15000 V Max, 30 TΩ CAT IV

RS Stock No. 189-1913

Brand Megger

Power Source: Battery, Mains
Safety Category: CAT IV 1000V
Tester Type: Insulation Tester

AED 34.188.55

in stock now

Select quantity

Megger MIT230HD Insulation & Continuity Tester, 250 V Min, 1000 V Max, 1000 mΩ CAT III

RS Stock No. 265-5914

Brand Megger

Maximum Operating Temperature: +55°C
Minimum Test Voltage: 250V
Test Current: 1mA

AED 3.649.13

in stock now

Select quantity

Megger 1007-157 Insulation Tester Probe Probe, For Use With MIT480

RS Stock No. 611-1308

Brand Megger

Accessory Type: Probe
Category: Insulation Tester Accessories
For Use With: MIT480

AED 523.44

in stock now

Select quantity

Megger 1002-648 Insulation Tester HV Test Lead Set Lead, For Use With MIT510/2

RS Stock No. 763-9270

Brand Megger

Accessory Type: HV Test Lead Set
Category: Insulation Tester Accessories
For Use With: MIT510/2

AED 2.189.42

in stock now

Select quantity

Megger 1002-647 Insulation Tester HV Test Lead Set Lead, For Use With MIT510/2

RS Stock No. 763-9276

Brand Megger

Accessory Type: HV Test Lead Set
Category: Insulation Tester Accessories
For Use With: MIT510/2

AED 1.587.62

in stock now

Select quantity

Megger 1012-068 Hook Strap Hook Strap, For Use With MTR105 Rotating Machine Tester

RS Stock No. 193-8410

Brand Megger

Accessory Type: Hook Strap
Category: Insulation Tester Accessories
For Use With: MTR105 Rotating Machine Tester

AED 64.38

in stock now

Select quantity

Megger PAT250SRX-EU Portable Appliance Tester Pat, Fly Back Converter, Portable RCD test, Low-Dropout (LDO) Linear

RS Stock No. 061-9067

Brand Megger

Minimum Operating Temperature: 0°C
Section: Test & Measurement
Width: 178 mm

AED 8.826.61

in stock now

Select quantity

Megger EVT100 Electrical Vehicle Tester, 50 V, 100 V, 250 V, 500 V, 1000 V No With USB

RS Stock No. 066-5485

Brand Megger

Insulation Test Voltage: 50 V, 100 V, 250 V, 500 V, 1000 V
Interface Type: USB
Section: Test & Measurement

AED 13.465.04

in stock now

Select quantity

Megger MIT525/2-RS AU ADVANCED 5kV IRT 2024 PIP

RS Stock No. 071-8506

Brand Megger

Category: Insulation Testers
Category Link: https://ae.rsdelivers.com/browse/ppe-safety-test-it/test-measurement/electrical-test-measurement/insulation-testers
Section: Test & Measurement

AED 23.593.50

in stock now

Select quantity

Megger MFT-X1-BS Multifunction Tester, 50V dc, Earth Resistance Measurement

RS Stock No. 265-5884

Brand Megger

Continuity Test Current: 10mA
Loop Impedance Test Type: High/Low Current
Non-Tripping: Yes

AED 14.407.76

in stock now

Show

What is a Megger Insulation Tester?

A Megger insulation tester is a precision instrument used to measure the electrical resistance of insulation in cables, windings, motors, transformers, and electrical installations. It applies a high DC voltage to the device under test and measures how well the insulation resists current leakage. This helps identify deteriorated or compromised insulation before faults occur. In addition to insulation resistance testing, many Megger models perform dielectric withstand tests (HIPOT tests) at controlled voltages to verify insulation integrity under high voltage stress. For professionals, a Megger insulation tester is an essential tool for preventive maintenance, safety compliance, and quality assurance across electrical, industrial, and building environments.

What is a Megger insulation tester used for?

Megger insulation testers are used across electrical maintenance, construction, and industrial settings to verify insulation integrity. Common applications include:

Testing insulation resistance of cables, motors, transformers, generators, and switchgear
Performing dielectric withstand (HIPOT) tests to confirm insulation can withstand voltage spikes
Assessing insulation aging and moisture intrusion in windings, insulation boards, and cable glands
Quality control during installation and commissioning of electrical systems
Preventive maintenance programs to comply with safety standards and regulatory requirements
Field surveys for HV equipment in manufacturing plants, utility substations, and building services

Megger insulation testers also serve training and troubleshooting roles, helping technicians distinguish between insulation defects, moisture, or connector corrosion. When paired with appropriate test leads and accessories, they provide reliable data for diagnosing insulation health.

How do I choose the right Megger insulation tester for my needs?

Choosing the right Megger insulation tester depends on voltage requirements, portability, features, and the type of equipment you service. Consider:

select a model that supports the maximum insulation test voltage you encounter (common ranges include 50 V, 125 V, 250 V, 500 V, 1000 V, and higher for industrial gear). Higher voltages are required for HV cables, transformers, and large motors.
ensure the device can measure in the expected ranges (e.g., kilo-ohms to giga-ohms) with accuracy appropriate for your assets.
a clear LCD or color display, plus configurable memory, PASS/FAIL indications, and date/time stamps help with record-keeping and reporting.
look for CAT safety ratings, IEC/EN compliance, and automatic discharge features to protect personnel and equipment.
handheld models are ideal for fieldwork; bench or portable units suit workshops and laboratories.
compatible test leads, remote probes, adapters for cables and windings, and calibration services extend the tester’s usefulness.
some Megger testers combine insulation resistance with continuity checks, capacitance measurement, and earth resistance testing for a broader diagnostic toolkit.

By aligning these factors with your typical tasks—cable testing, motor winding checks, transformer insulation, or substation maintenance—you’ll choose a Megger insulation tester that delivers reliable data, reduces downtime, and simplifies reporting.

How do you perform an insulation resistance test with a Megger?

Performing an insulation resistance test with a Megger follows a careful, safety-conscious procedure. General steps include:

Plan the test: identify the equipment under test, disconnect any live circuits, and verify the test environment is safe.
Choose the appropriate test voltage: select the voltage level recommended for the asset (common values are 250 V, 500 V, or 1000 V for many industrial components).
Connect test leads properly: attach the test lead positive to the conductor or insulation surface and the test lead negative to the reference point or earth as instructed by the device and the asset’s documentation.
Discharge and read: press the test button to apply voltage and monitor the insulation resistance reading. Remember to keep leads stable and avoid touching any live conductors.
Interpret results: higher resistance indicates better insulation; lower values suggest insulation degradation, moisture intrusion, or contamination. Compare results against equipment manuals or established acceptance criteria.
Document and record: save readings with date, asset ID, test voltage, environmental conditions, and operator notes for traceability.

Safety reminders: never test energized equipment, use PPE appropriate for the voltage, and follow your facility’s lockout/tagout procedures. If you observe readings that fall outside acceptance criteria, isolate the asset and plan maintenance or replacement.

What maintenance and care do Megger insulation testers require?

Proper care extends the life and accuracy of Megger insulation testers. Key maintenance practices include:

Regular calibration: schedule calibration through authorized Megger service to maintain accuracy across measurement ranges.
Battery health: check battery status, replace or recharge as recommended, and store the tester with the battery removed if required by the model.
Fuse and test lead inspection: inspect fuses, leads, and probes for wear, cracking, or damage; replace faulty components before testing.
Clean storage: keep the instrument in a protective case, away from moisture, dust, and extreme temperatures.
Software updates: apply firmware or software updates if the model supports them to improve stability and features.
Zeroing and self-checks: perform any built-in self-tests or zeroing procedures per the user manual to ensure baseline accuracy.

Regular maintenance minimizes drift, improves safety, and ensures reliability during critical electrical tests in field and lab environments.

What accessories and related products should I consider with Megger insulation testers?

A comprehensive insulation testing setup often includes compatible accessories and related equipment:

high-voltage rated leads, detachable probes, and remote measurement devices for hard-to-reach connections.
spool adapters, banana plug adapters, and direct-connect interfaces for cables, windings, and busbars.
rugged cases that protect the instrument in field service and transport.
official Megger calibration services to maintain traceable accuracy.
devices or modules that log measurements over time for trend analysis and maintenance reporting.
PPE such as insulated gloves, eye protection, and arc-flash awareness tools for high-voltage testing environments.

These add-ons help you tailor a Megger insulation tester to industrial environments, fleet maintenance, or lab quality assurance programs.

How should I interpret insulation resistance results from a Megger insulation tester?

Interpreting insulation resistance results requires contextual understanding of the asset, voltage level, and environmental conditions. Practical guidance includes:

Higher resistance is generally better; very low readings indicate compromised insulation, moisture, or contamination.
Compare against manufacturer specifications, industry standards, or historical baselines for the same asset.
Consider the time-dependent leakage behavior: some tests provide insulation resistance versus time data to identify creeping currents or moisture migration.
Differentiate between insulation resistance and leakage current: a good resistance value does not always imply perfect insulation if there are measurement artifacts.
For high-voltage equipment, consult IEC or local standards to determine acceptable ranges for the tested voltage and equipment class.

Record the test conditions (voltage, temperature, humidity, test duration) to enable accurate trend analysis over the equipment’s life cycle.

What are the common Megger model families and how do they differ?

Megger offers a range of insulation testers designed for different environments and users:

compact, portable, and quick to deploy for field service and maintenance rounds. They cover mid-range voltage options and often include memory and straightforward pass/fail indicators.
larger displays, higher accuracy, and extended test capabilities suitable for laboratories or production floors where repeatable testing is essential.
specialized units capable of delivering kilovolt-level test voltages for HV cables, transformers, and substations, often with advanced safety features and data logging.
models that integrate insulation resistance, continuity, capacitance, and earth resistance measurements in one instrument for a broader diagnostic tool.

When selecting a model, match the voltage rating, measurement range, data capture, and durability to your application—from field service to industrial maintenance and factory QA.

Where can I find reliable Megger insulation tester training and support?

Megger provides official product documentation, training modules, and customer support to help technicians maximize the value of insulation testers. Helpful resources include:

Product manuals with wiring diagrams, test procedures, and safety guidelines
Commissioning and maintenance checklists for field technicians
Calibration and service information from authorized Megger centers
Technical webinars, application notes, and troubleshooting guides
Online forums and community discussions where professionals share best practices

For critical installations, rely on accredited service providers and verify traceable calibration to ensure compliance with industry standards and quality management systems.

Clamp meter Megger tester Flow meter Network tester Electrical meter Aluminium Back Boxes Cable Mount Industrial Power Connectors Weidmüller ACT20P 3M Tape Dispensers 204318 Molex

"Megger Insulation Testers"

Megger Insulation Tester Accessory

Megger 1008-022 Insulation Tester HV Test Lead Set Lead, For Use With Insulation Resistance Testers

Megger 1012-063 Insulation Tester Case Case, For Use With MTR105 Rotating Machine Tester

Megger 1011-929 Insulation Tester Probe Probe, For Use With MTR105 Rotating Machine Tester

Megger 1012-064 Insulation Tester Pin Probe Pins, For Use With MTR105 Rotating Machine Tester

Megger 1011-928 Insulation Tester Crocodile Clip Crocodile Clip, For Use With MTR105 Rotating Machine Tester

Megger 1012-069 Insulation Tester Crocodile Clip Crocodile Clip, For Use With MTR105 Rotating Machine Tester

Megger 1012-066 Insulation Tester Probe Probe, For Use With MTR105 Rotating Machine Tester

Megger MIT1025 Insulation Tester, 500 V Min, 10000 V Max, 20 TΩ

Megger MIT515 Insulation Tester, 250 V Min, 5000 V Max CAT IV

Megger MIT525 Insulation Tester, 250 V Min, 5000 V Max, 20 TΩ 1000 V CAT II, 600 V CAT III

Megger 1002-643 Insulation Tester HV Test Lead Set Lead, For Use With MIT510/2

Megger 1007-156 Insulation Tester Probe Probe, For Use With MIT320 Series, MIT330 Series

Megger 1012-065 Insulation Tester Probe Probe, For Use With MTR105 Rotating Machine Tester

Megger MIT1525 Insulation Tester, 1000 V Min, 15000 V Max, 30 TΩ CAT IV

Megger MIT230HD Insulation & Continuity Tester, 250 V Min, 1000 V Max, 1000 mΩ CAT III

Megger 1007-157 Insulation Tester Probe Probe, For Use With MIT480

Megger 1002-648 Insulation Tester HV Test Lead Set Lead, For Use With MIT510/2

Megger 1002-647 Insulation Tester HV Test Lead Set Lead, For Use With MIT510/2

Megger 1012-068 Hook Strap Hook Strap, For Use With MTR105 Rotating Machine Tester

Megger PAT250SRX-EU Portable Appliance Tester Pat, Fly Back Converter, Portable RCD test, Low-Dropout (LDO) Linear

Megger EVT100 Electrical Vehicle Tester, 50 V, 100 V, 250 V, 500 V, 1000 V No With USB

Megger MIT525/2-RS AU ADVANCED 5kV IRT 2024 PIP

Megger MFT-X1-BS Multifunction Tester, 50V dc, Earth Resistance Measurement

What is a Megger Insulation Tester?

What is a Megger insulation tester used for?

How do I choose the right Megger insulation tester for my needs?

How do you perform an insulation resistance test with a Megger?

What maintenance and care do Megger insulation testers require?

What accessories and related products should I consider with Megger insulation testers?

How should I interpret insulation resistance results from a Megger insulation tester?

What are the common Megger model families and how do they differ?

Where can I find reliable Megger insulation tester training and support?