Rubber seal | RS UAE

Seal Material

Nitrile Rubber (1385)

Nitrile Rubber (Stem Seal), POM-Mos2 (Ball Seal) (9)

Nitrile Rubber, PTFE (8)

Nitrile Rubber, POM (Ball Seat) (4)

Acrylonitrile-Butadiene Rubber (1)

Silicone Rubber (1)

Seal Type

Rotary Shaft Seal (1010)

V Seal (21)

Hydraulic Seal (3)

Coupling Gender

Male (150)

Female (146)

Female, Male (1)

Thread Gender

Female (140)

Male (121)

Female, Male (9)

Connection Type

Threaded (139)

Hose Barb (65)

Colour

Black (45)

Slate (22)

Grey (21)

White (17)

Beige (2)

Green, White (2)

Beige, Grey (1)

Blue (1)

Coupling Type

Quick Connect Coupling Plug (59)

Quick Connect Coupling Socket (35)

Clamp Coupling (1)

Compatible with

CEJN 320/410, ISO 7241-1-B, Rectus 25/27 (18)

ISO Standard 16028 (18)

ISO 7241-1-B (12)

Faster ANV Series, Hansen HA 15000 (Gromelle), Intertraco A Series, Safeway S565, Stucchi BIR Series (10)

ISO-DIS 16028 (8)

ISO Standard 14540 (4)

CEJN 115 Nipple (3)

ISO 7241-1-A (3)

Body Material

Steel (21)

Nickel Plated Brass (12)

Carbon Steel (6)

Stainless Steel (5)

Zinc Passivated Steel (5)

Phosphated Steel (4)

Aluminium (1)

Brass (1)

Wrought Aluminium Alloy (1)

Locking Style

Ball Lock (43)

Screw Lock (11)

Elongation

90% (18)

145% (10)

250% (8)

450% (6)

≥100% (4)

25% (1)

400% (1)

65% (1)

Suitability

Gasket, Seals (18)

Gaskets, Seals,Thermal Insulation, Cushioning (10)

Gasket, Hose, Liner, Protective Sleeve, Seal, Tubing (6)

Dust Seal, Low Pressure Gasket, Transport (5)

Gasket, Seal, Thermal Insulation (4)

Chemical Processing, Food Processing, Gasket and Seal, Roofing and Construction (3)

Chemical Apparatus, Food Processing Industry, Insulators, Pallets & Drip Pans, Seals, Ventilation Ducts, Water Treatment Plants (1)

Food Processing Gasket, Seal and Appliance Seal (1)

Friction Bearings, Gears, Pump Housing & Ball Valve Seal, Wear Strips (1)

Tensile Strength

0.45MPa (18)

0.6MPa (10)

9MPa (6)

4MPa (5)

≥0.2MPa (4)

13MPa (3)

10MPa (1)

35 MPa (1)

95 MPa (1)

Adhesive Backing

No (26)

Yes (21)

Connection Port Thread

G 1/2 (12)

G 3/8 (11)

G 1/4 (10)

G 3/4 (6)

G 1 (3)

G 1/8 (2)

BSP 1/2 (1)

BSP 1/4 (1)

BSP 3/8 (1)

IP Rating

IP66, IP68 (42)

IP54 (1)

IP68 (1)

Standards Met

CSA Certified, UL 514 Listed, UL 94 V-2 (25)

CSA C22.2 Certified, UL 514 Listed, UL 94 V-2 (17)

Density

0.12g/cm³ (18)

0.25g/cm³ (10)

1.45g/cm³ (5)

115kg/m³ (4)

0.91g/cm³ (1)

1.32g/cm³ (1)

Flammability Rating

FMVSS 302 (22)

UL 94 HB (11)

UL 94 V-0 (1)

Bearing Unit Type

Locating Ring Accessory (22)

Ring Seal Accessory (1)

Select quantity

RS PRO Nitrile Rubber Seal, 10mm ID, 19mm OD, 7mm

RS Stock No. 226-3695

Brand RS Pro

Category: Seals
Seal Material: Nitrile Rubber
Seal Type: Rotary Shaft Seal

AED 45.09

in stock now

Select quantity

RS PRO Nitrile Rubber Seal, 10mm ID, 22mm OD, 7mm

RS Stock No. 226-3697

Brand RS Pro

Outside Diameter: 22mm
Seal Material: Nitrile Rubber
Seal Type: Rotary Shaft Seal

AED 39.03

in stock now

Select quantity

RS PRO Nitrile Rubber Seal, 10mm ID, 24mm OD, 7mm

RS Stock No. 226-3698

Brand RS Pro

Category: Seals
Outside Diameter: 24mm
Thickness: 7mm

AED 37.26

in stock now

Select quantity

RS PRO Nitrile Rubber Seal, 10mm ID, 26mm OD, 7mm

RS Stock No. 226-3699

Brand RS Pro

Category: Seals
Inside Diameter: 10mm
Thickness: 7mm

AED 43.38

in stock now

Select quantity

RS PRO Nitrile Rubber Seal, 12mm ID, 19mm OD, 5mm

RS Stock No. 226-3700

Brand RS Pro

Category: Seals
Outside Diameter: 19mm
Thickness: 5mm

AED 39.03

in stock now

Select quantity

RS PRO Nitrile Rubber Seal, 12mm ID, 22mm OD, 7mm

RS Stock No. 226-3702

Brand RS Pro

Outside Diameter: 22mm
Seal Material: Nitrile Rubber
Thickness: 7mm

AED 37.26

in stock now

Select quantity

RS PRO Nitrile Rubber Seal, 12mm ID, 24mm OD, 7mm

RS Stock No. 226-3703

Brand RS Pro

Outside Diameter: 24mm
Seal Material: Nitrile Rubber
Seal Type: Rotary Shaft Seal

AED 39.03

in stock now

Select quantity

RS PRO Nitrile Rubber Seal, 12mm ID, 28mm OD, 7mm

RS Stock No. 226-3705

Brand RS Pro

Seal Material: Nitrile Rubber
Seal Type: Rotary Shaft Seal
Thickness: 7mm

AED 43.16

in stock now

Select quantity

RS PRO Nitrile Rubber Seal, 15mm ID, 26mm OD, 7mm

RS Stock No. 226-3712

Brand RS Pro

Inside Diameter: 15mm
Outside Diameter: 26mm
Seal Material: Nitrile Rubber

AED 59.42

in stock now

Select quantity

RS PRO Nitrile Rubber Seal, 17mm ID, 30mm OD, 7mm

RS Stock No. 226-3724

Brand RS Pro

Inside Diameter: 17mm
Seal Material: Nitrile Rubber
Seal Type: Rotary Shaft Seal

AED 57.83

in stock now

Select quantity

RS PRO Nitrile Rubber Seal, 17mm ID, 32mm OD, 7mm

RS Stock No. 226-3725

Brand RS Pro

Inside Diameter: 17mm
Outside Diameter: 32mm
Seal Type: Rotary Shaft Seal

AED 46.53

in stock now

Select quantity

RS PRO Nitrile Rubber Seal, 17mm ID, 35mm OD, 7mm

RS Stock No. 226-3726

Brand RS Pro

Outside Diameter: 35mm
Seal Type: Rotary Shaft Seal
Thickness: 7mm

AED 46.03

in stock now

Select quantity

RS PRO Nitrile Rubber Seal, 18mm ID, 32mm OD, 7mm

RS Stock No. 226-3730

Brand RS Pro

Inside Diameter: 18mm
Outside Diameter: 32mm
Seal Material: Nitrile Rubber

AED 46.53

in stock now

Select quantity

RS PRO Nitrile Rubber Seal, 19mm ID, 30mm OD, 7mm

RS Stock No. 226-3732

Brand RS Pro

Inside Diameter: 19mm
Outside Diameter: 30mm
Seal Material: Nitrile Rubber

AED 43.33

in stock now

Select quantity

RS PRO Nitrile Rubber Seal, 20mm ID, 30mm OD, 7mm

RS Stock No. 226-3737

Brand RS Pro

Category: Seals
Seal Type: Rotary Shaft Seal
Thickness: 7mm

AED 43.38

in stock now

Select quantity

RS PRO Nitrile Rubber Seal, 20mm ID, 32mm OD, 7mm

RS Stock No. 226-3738

Brand RS Pro

Inside Diameter: 20mm
Outside Diameter: 32mm
Seal Material: Nitrile Rubber

AED 46.75

in stock now

Select quantity

RS PRO Nitrile Rubber Seal, 20mm ID, 35mm OD, 7mm

RS Stock No. 226-3740

Brand RS Pro

Category: Seals
Seal Material: Nitrile Rubber
Thickness: 7mm

AED 52.09

in stock now

Select quantity

RS PRO Nitrile Rubber Seal, 20mm ID, 38mm OD, 8mm

RS Stock No. 226-3741

Brand RS Pro

Category: Seals
Inside Diameter: 20mm
Outside Diameter: 38mm

AED 51.10

in stock now

Select quantity

RS PRO Nitrile Rubber Seal, 20mm ID, 40mm OD, 10mm

RS Stock No. 226-3743

Brand RS Pro

Inside Diameter: 20mm
Outside Diameter: 40mm
Seal Material: Nitrile Rubber

AED 64.83

in stock now

Select quantity

RS PRO Nitrile Rubber Seal, 20mm ID, 47mm OD, 7mm

RS Stock No. 226-3746

Brand RS Pro

Outside Diameter: 47mm
Seal Material: Nitrile Rubber
Thickness: 7mm

AED 74.92

in stock now

Select quantity

RS PRO Nitrile Rubber Seal, 22mm ID, 40mm OD, 7mm

RS Stock No. 226-3749

Brand RS Pro

Inside Diameter: 22mm
Seal Material: Nitrile Rubber
Seal Type: Rotary Shaft Seal

AED 66.92

in stock now

Select quantity

RS PRO Nitrile Rubber Seal, 24mm ID, 40mm OD, 7mm

RS Stock No. 226-3751

Brand RS Pro

Category: Seals
Inside Diameter: 24mm
Seal Material: Nitrile Rubber

AED 66.92

in stock now

Select quantity

RS PRO Nitrile Rubber Seal, 25mm ID, 36mm OD, 7mm

RS Stock No. 226-3754

Brand RS Pro

Category: Seals
Outside Diameter: 36mm
Seal Type: Rotary Shaft Seal

AED 51.27

in stock now

Select quantity

RS PRO Nitrile Rubber Seal, 25mm ID, 37mm OD, 7mm

RS Stock No. 226-3755

Brand RS Pro

Category: Seals
Outside Diameter: 37mm
Seal Type: Rotary Shaft Seal

AED 51.27

in stock now

Show

...

110

What is a rubber seal?

A rubber seal is an elastomeric component designed to fill the gap between two mating surfaces and prevent the passage of liquids, gases, dust, or contaminants. Rubber seals come in many shapes and forms, including O-rings, lip seals, oil seals, gaskets, and custom molded profiles. They work by creating a tight line contact that deforms under pressure, producing a sealant barrier that resists leakage in horizontal, vertical, and dynamic motion applications. Key benefits include durable compression under load, resistance to environmental factors, and compatibility with a broad range of fluids and media. Because rubber seals are made from different polymers, they can be tailored for static seals (fixed assemblies) or dynamic seals (rotating or reciprocating joints) across industries from automotive to hydraulics, pneumatic systems, and industrial machinery.

Prevents fluid or gas leaks
Maintains pressure and efficiency in systems
Compensates for small misalignments or surface irregularities
Resists wear, temperature changes, and chemical exposure when selected correctly

When selecting a rubber seal, engineers consider material type, hardness (durometer), size tolerances, installation method, and service environment to ensure a reliable seal over the product lifecycle.

What are the common materials used for rubber seals?

Rubber seals are produced from a range of elastomer polymers, each chosen for specific chemical resistance, temperature tolerance, and physical properties. The most widely used materials include:

EPDM (ethylene propylene diene monomer) — excellent water and steam resistance, common in HVAC and automotive cooling systems
Nitrile/NBR — good oil and fuel resistance, widely used in automotive, hydraulic, and industrial seals
Silicone — broad temperature range, suitable for food contact and sanitary environments
FKM/Viton — high chemical resistance to fuels and solvents, ideal for harsh chemical and high-temperature applications
Neoprene/CR — versatility, good weathering and ozone resistance, common in outdoor and marine seals
HNBR — improved oil resistance and heat resistance over standard NBR
Fluorosilicone — combines silicone's temperature range with fluorinated oil resistance for specialized fluids

In practice, engineers select a material based on the media, temperature range, exposure to UV/ozone, and mechanical demands such as movement or static sealing. For medical, food-grade, or pharmaceutical equipment, food-safe grades and certifications (FDA/USP and 3-A Sanitary) may drive material choice.

What are the main types of rubber seals used in industry?

Rubber seals fall into several broad categories, each serving different sealing requirements:

O-rings — circular cross-section seals used in static and dynamic joints; simple, versatile, and available in many materials
Lip seals — axial or radial seals with a sealing lip designed to retain lubricants and exclude contaminants in rotating shafts
Oil and hydraulic seals — specially shaped to handle pressure and lubricant compatibility in pumps and actuators
Gaskets — flat seals used between mating surfaces to prevent leakage in flanged and gasketed joints
Dynamic seals — designed to seal moving parts such as shafts or pistons, requiring good wear resistance and low friction
Static seals — maintain a seal without movement, relying on material resilience and surface finish
Specialty seals — medical-grade, food-grade, or high-temperature variants for niche applications

Each type combines with a material choice to meet specific chemical, temperature, and pressure requirements, ensuring long service life in pumps, valves, housings, and manifolds.

How do I choose the right rubber seal for a particular application?

Selecting the correct rubber seal starts with understanding the operating environment and service demands. Consider these key factors:

— identify the liquid, gas, or solvent, and choose a material with proven resistance to it (oil, water, fuels, acids, alkaline solutions, solvents, detergents).
Temperature range — ensure the material remains elastic and does not crack or extrude at the operating temperatures.
Pressure and speed — dynamic seals in high-pressure systems require higher durometer and tougher wear resistance.
Chemical exposure — exposure to ozone, UV, or weathering may favor neoprene or fluorinated elastomers.
Movement and alignment — dynamic seals must tolerate shaft wear and misalignment, while static seals rely on surface finish and seating accuracy.
Mechanical properties — durometer (Shore hardness), compression set, and elasticity affect long-term seal integrity.
— for food, medical, or pharmaceutical lines, compliance (FDA, 3-A, USP) may dictate material choices

Once these factors are defined, you can narrow to specific product lines, such as NBR-based oil seals for hydraulic pumps or EPDM seals for water and steam lines. Always verify compatibility with cold seals, hot torque conditions, and operating pressures to minimize leaks and downtime.

How do rubber seals perform under different temperatures and chemicals?

Material performance varies with temperature and chemical exposure. Typical guidance includes:

— excellent oil resistance; good for mid-range temperatures but can harden or swell with certain solvents
— outstanding water and steam resistance; performs well incool to moderate high temperatures, but not compatible with petroleum-based fluids
— wide temperature tolerance (low to very high temperatures); good chemical inertness for many foods and medical devices, but may have higher permeability
— superior chemical resistance to fuels, solvents, and high temperatures; ideal for aggressive media
— versatile but moderate chemical resistance; good for weather and ozone exposure

Understanding a material’s chemical compatibility charts and temperature limits helps prevent swelling, hardening, or o-ring nibble under load. For critical service, run compatibility tests and consider multi-material seals or coatings to extend life in harsh environments.

How do you install or maintain rubber seals in machinery?

Proper installation and maintenance extend seal life and prevent leaks. Consider these practical steps:

Inspect surfaces for nicks, scratches, or burrs; repair or replace damaged flanges and housings
Choose the correct cross-section and inner diameter; verify tolerances against the shaft, bore, or gland
Lubricate where appropriate with silicone-based or manufacturer-approved lubricants to reduce installation friction
Avoid excessive compression; follow recommended seating torque and assembly procedures
Protect seals during assembly from sharp edges, debris, and contamination
Implement routine checks for leaks, compression set, and wear; replace seals showing degradation

Regular maintenance includes cleaning, inspecting for aging and UV exposure, and using fresh lubricants appropriate to the seal material and media. In high-speed or high-pressure systems, consider protective coatings or multi-seal arrangements to reduce wear and extend service life.

What are common issues with rubber seals and how can I troubleshoot?

Common problems include leaks due to improper sizing, excessive compression, extrusion, chemical attack, aging, and surface damage. Troubleshooting tips:

Check seal sizing and seating clearances; ensure the cross-section matches the gland design
Inspect for compression set or hardening; replace with a more suitable material or durometer if needed
Look for chemical attack signs such as swelling, softening, or surface cracking
Assess surface finish of mating parts; rough or damaged surfaces can prevent proper sealing
Perform leak-rate testing or pressure-decay tests to pinpoint leakage points

If issues persist, review media compatibility, temperature fluctuations, and the seal’s service life; consider redesign or switching to a different polymer grade better suited to the operating conditions.

Do rubber seals meet industry standards and certifications?

Yes, many rubber seals are manufactured to meet industry standards and regulatory requirements to support quality and safety:

materials compatible with contact with consumables (FDA-compliant silicones, EPDM used in food processing equipment)
grades with USP or ISO certifications for cleanroom and sterile applications
seals designed for high temperature, pressure, and environmental exposure
seals tested for compatibility with hydraulic fluids, lubricants, coolants, and coolants under various temperatures
compliance to minimize hazardous substances in components

Always verify supplier documentation, material certificates, and performance data sheets to ensure the seal choice aligns with project-spec requirements and regulatory expectations.

Can I get custom rubber seals or molded seal solutions?

Custom rubber seals are common in RS Components applications where standard offerings do not precisely fit the gland or housing geometry. Custom solutions may include:

Molded seals with tailored cross-sections, profiles, and durometers to match complex geometries
O-ring and quad-ring assemblies in specific or multi-material configurations
Coated seals or bonded seals for improved chemical resistance or improved lubrication retention
Soft-touch designs for reduced shaft wear and improved lubrication

Lead times depend on volume, material, and cure processes; collaboration with RS Components technical support helps specify material grade, certification, and inspection criteria to ensure consistent performance in production environments.

Rubber Door Seals Door seals Rubber sheets Door seal strip Rubber padding WIMA MKS4 40V dc Aluminium Capacitors 2 5 mm2 wire 3 core Hewlett Packard Printer Ink Pla 3d printing filament

"Rubber seal"

RS PRO Nitrile Rubber Seal, 10mm ID, 19mm OD, 7mm

RS PRO Nitrile Rubber Seal, 10mm ID, 22mm OD, 7mm

RS PRO Nitrile Rubber Seal, 10mm ID, 24mm OD, 7mm

RS PRO Nitrile Rubber Seal, 10mm ID, 26mm OD, 7mm

RS PRO Nitrile Rubber Seal, 12mm ID, 19mm OD, 5mm

RS PRO Nitrile Rubber Seal, 12mm ID, 22mm OD, 7mm

RS PRO Nitrile Rubber Seal, 12mm ID, 24mm OD, 7mm

RS PRO Nitrile Rubber Seal, 12mm ID, 28mm OD, 7mm

RS PRO Nitrile Rubber Seal, 15mm ID, 26mm OD, 7mm

RS PRO Nitrile Rubber Seal, 17mm ID, 30mm OD, 7mm

RS PRO Nitrile Rubber Seal, 17mm ID, 32mm OD, 7mm

RS PRO Nitrile Rubber Seal, 17mm ID, 35mm OD, 7mm

RS PRO Nitrile Rubber Seal, 18mm ID, 32mm OD, 7mm

RS PRO Nitrile Rubber Seal, 19mm ID, 30mm OD, 7mm

RS PRO Nitrile Rubber Seal, 20mm ID, 30mm OD, 7mm

RS PRO Nitrile Rubber Seal, 20mm ID, 32mm OD, 7mm

RS PRO Nitrile Rubber Seal, 20mm ID, 35mm OD, 7mm

RS PRO Nitrile Rubber Seal, 20mm ID, 38mm OD, 8mm

RS PRO Nitrile Rubber Seal, 20mm ID, 40mm OD, 10mm

RS PRO Nitrile Rubber Seal, 20mm ID, 47mm OD, 7mm

RS PRO Nitrile Rubber Seal, 22mm ID, 40mm OD, 7mm

RS PRO Nitrile Rubber Seal, 24mm ID, 40mm OD, 7mm

RS PRO Nitrile Rubber Seal, 25mm ID, 36mm OD, 7mm

RS PRO Nitrile Rubber Seal, 25mm ID, 37mm OD, 7mm

What is a rubber seal?

What are the common materials used for rubber seals?

What are the main types of rubber seals used in industry?

How do I choose the right rubber seal for a particular application?

How do rubber seals perform under different temperatures and chemicals?

How do you install or maintain rubber seals in machinery?

What are common issues with rubber seals and how can I troubleshoot?

Do rubber seals meet industry standards and certifications?

Can I get custom rubber seals or molded seal solutions?