Tap fittings | RS UAE

Body Material

Stainless Steel (136)

Nickel Plated Brass (33)

Brass (19)

ABS (15)

PVC-U (13)

Acetal (2)

Plastic (2)

Polymer (1)

Resin (1)

Type

2 Way (119)

Ball Valve (66)

3 Way (14)

Full Bore, 2 Way (4)

Reduced Bore, 2 Way (4)

Appliance Valve (1)

Attachment Type

Threaded (128)

Flanged (31)

Solvent Cement Socket (21)

Compression (14)

Compression, Threaded (1)

Push Fitting (1)

Ball Material

Stainless Steel (145)

Brass (12)

Chrome Plated Brass (7)

Hard Chrome (6)

Nickel Plated Brass (2)

Operating Pressure

63bar (71)

16bar (35)

20bar (17)

40bar (10)

6 - 8.4bar (9)

-0.95 → 30bar (6)

-0.4 → 40bar (3)

25bar (3)

63 (1)

Product Type

Malleable Iron Fitting (20)

Tap Fitting (14)

Tapping Flange (11)

Compression Fitting (8)

Handheld Enclosure (8)

Brass Pipe Fitting (7)

Plastic Pipe Fitting (7)

Stopcock (2)

Water Tap Accessory (1)

Thread Standard

NPT (31)

Rp (21)

G (6)

BSP (5)

BSPP (5)

ISO (2)

Safe for Use With

Food, Water (20)

Water (8)

Air, Vacuum, Water (6)

Gas, Oil, Petrol, Water (5)

Gas (1)

Handle Type

Lever (38)

T-Handle (1)

Maximum Working Pressure bar

16bar (30)

30bar (6)

40bar (3)

Maximum Working Pressure psi

232psi (23)

145psi (3)

230psi (2)

580.15psi (2)

580psi (2)

725psi (2)

913psi (2)

240psi (1)

435psi (1)

Material

Aluminium (11)

Stainless Steel (8)

Brass (7)

Acetal (5)

Chlorinated Polyvinyl Chloride (1)

CPVC (1)

Polybutylene (1)

Connection Gender A

Female (24)

Male (9)

Connection Gender B

Female (26)

Male (3)

Maximum Operating Pressure

25 bar (18)

12 bar (6)

10 bar (3)

0.6 Mpa (1)

Maximum Operating Temperature

120°C (18)

90°C (6)

65°C (2)

105°C (1)

50°C (1)

Connection Standard A

G (11)

BSPT (7)

BSP (5)

R (2)

Metric (1)

Minimum Operating Temperature

-20°C (18)

0°C (3)

1°C (2)

-10°C (1)

Connection Standard B

BSPP (18)

Threaded (2)

Metric (1)

Finish

Galvanised (11)

Black Oxide (9)

Handle Material

Aluminium (6)

PVC Coated Steel (6)

Zinc Plated Steel (3)

Polymer (1)

Polymer, Steel (1)

Stainless Steel (1)

Handle Colour

Blue (8)

White (7)

Black (2)

Fitting Direction

Straight (7)

Elbow (3)

90° (2)

Colour

Black (3)

Light Grey (3)

Grey (2)

External Height

30mm (4)

24.9mm (2)

25mm (1)

39.9mm (1)

External Length

160mm (4)

100.1mm (2)

130mm (1)

190mm (1)

External Width

84mm (4)

59.9mm (2)

100.1mm (1)

68mm (1)

IP Rating

IP54 (3)

IP65 (3)

IP40 (2)

Special Features

ABS Plastic Hand Held Enclosures With Battery Compartment Option, Removable Front Panel, Moulded in a Light Grey General Purpose ABS Plastic With a Light Texture (Material Carries a UL Flammability Rating of UL94 HB), The Two Largest Sizes Include Four Self-Adhesive Rubber Feet for Desktop Use, Ideally Suited for Mounting Printed Circuit Boards, Threaded into Integral Brass Bushings. Perfect for Applications When Repetitive Assembly and Disassembly Are Required (Except for the Two Smallest Sizes Which Use Self-Tapping M2.6 Screws), Electronic Instrument Enclosures, Assembled With M3 Philips Machine Screws, Both Top and Bottom Halves Contain P.C. Board Standoffs Moulded in, Lap Joint Construction Provides Some Protection Against Dust Accumulation and Splashing Water, Ergonomically Designed for a Comfortable Fit into the User’ (1)

ABS Plastic Hand Held Enclosures With Watertight Option, The Top Half Includes a Smooth Recessed Area for Membrane, Ideally Suited for Mounting Printed Circuit Boards, Moulded in a General Purpose ABS Plastic With a Light Texture (Material Carries a UL Flammability Rating of UL94 HB), Available in Two Versions - Gasketed (IP65 Rated) and No Gasket, Assembled With M3 Philips Self-Tapping Screws, Ergonomically Designed for a Comfortable Fit into the User’ (1)

Assembled With M3 Philips Machine Screws, Ideally Suited for Mounting Printed Circuit Boards, Threaded into Integral Brass Bushings. Perfect for Applications When Repetitive Assembly and Disassembly Are Required (Except for the Two Smallest Sizes Which Use Self-Tapping M2.6 Screws), The Two Largest Sizes Include Four Self-Adhesive Rubber Feet for Desktop Use, Electronic Instrument Enclosures, Ergonomically Designed for a Comfortable Fit into the User’ (1)

Available in Two Versions - Gasketed (IP65 Rated) and No Gasket, Both Top and Bottom Halves Contain P.C. Board Standoffs Moulded in, Assembled With M3 Philips Self-Tapping Screws, The Top Half Includes a Smooth Recessed Area for Membrane, ABS Plastic Hand Held Enclosures With Watertight Option, Ideally Suited for Mounting Printed Circuit Boards, Ergonomically Designed for a Comfortable Fit into the User’ (1)

Both Top and Bottom Halves Contain P.C. Board Standoffs Moulded in, Label or Silkscreen, Lap Joint Construction Provides Protection Against Dust Accumulation and Splashing Water, The Top Half Includes a Smooth Recessed Area for Membrane, Available in Two Versions - Gasketed (IP65 Rated) and No Gasket, Electronic Hand Held Enclosures, Assembled With M3 Philips Self-Tapping Screws, Ideally Suited for Mounting Printed Circuit Boards, Moulded in a General Purpose ABS Plastic With a Light Texture (Material Carries a UL Flammability Rating of UL94 HB), Ergonomically Designed for a Comfortable Fit into the User’ (1)

Lap Joint Construction Provides Protection Against Dust Accumulation and Splashing Water, Electronic Hand Held Enclosures, Assembled With M3 Philips Self-Tapping Screws, Both Top and Bottom Halves Contain P.C. Board Standoffs Moulded in, Label or Silkscreen, The Top Half Includes a Smooth Recessed Area for Membrane, Ideally Suited for Mounting Printed Circuit Boards, Moulded in a General Purpose ABS Plastic With a Light Texture (Material Carries a UL Flammability Rating of UL94 HB), Ergonomically Designed for a Comfortable Fit into the User’ (1)

Moulded in a General Purpose ABS Plastic With a Light Texture (Material Carries a UL Flammability Rating of UL94 HB), ABS Plastic Hand Held Enclosures With Watertight Option, Assembled With M3 Philips Self-Tapping Screws, The Top Half Includes a Smooth Recessed Area for Membrane, Both Top and Bottom Halves Contain P.C. Board Standoffs Moulded in, Lap Joint Construction Provides Protection Against Dust Accumulation and Splashing Water, Label or Silkscreen, Available in Two Versions - Gasketed (IP65 Rated) and No Gasket, Ideally Suited for Mounting Printed Circuit Boards, Ergonomically Designed for a Comfortable Fit into the User’ (1)

The Two Largest Sizes Include Four Self-Adhesive Rubber Feet for Desktop Use, Threaded into Integral Brass Bushings. Perfect for Applications When Repetitive Assembly and Disassembly Are Required (Except for the Two Smallest Sizes Which Use Self-Tapping M2.6 Screws), ABS Plastic Hand Held Enclosures With Battery Compartment Option, Assembled With M3 Philips Machine Screws, Both Top and Bottom Halves Contain P.C. Board Standoffs Moulded in, Lap Joint Construction Provides Some Protection Against Dust Accumulation and Splashing Water, Moulded in a Light Grey General Purpose ABS Plastic With a Light Texture (Material Carries a UL Flammability Rating of UL94 HB), Ideally Suited for Mounting Printed Circuit Boards, Electronic Instrument Enclosures, Removable Front Panel, Ergonomically Designed for a Comfortable Fit into the User’ (1)

"Tap fittings"

3M Tap Fitting, Connector for Taps for use with Taps

Watts Tap Fitting, Bracket Partition for Taps for use with Garden Tap

Festo Tap Fitting, Hand Lever for use with Tap, Valve

Festo Tap Fitting, Hand Lever for use with Tap, Valve

Festo Tap Fitting, Hand Lever for use with Tap, Valve

Festo Tap Fitting, Hand Lever for use with Valve, Tap

Festo Tap Fitting, Hand Lever for use with Valve, Tap

RS PRO Tap Fitting, Tap Flow Regulator for use with Hand Wash Basin, Pillar Tap

RS PRO Tap Fitting, Classic Cross Head Tap Conversion Kit for use with 1/2 in Tap

RS PRO Tap Fitting, 35 mm Ceramic Cartridge for use with Adapt-A-Tap

RS PRO Tap Fitting, Acrylic Adapt-A-Tap Conversion Kit for use with 1/2 in Tap, 3/4 in Tap

RS PRO Tap Fitting, Chrome Adapt-A-Tap Lever Conversion Kit for use with 1/2 in Tap

Watts Tap Fitting, Backflow Preventer for use with CA 9C FF 3/4 in

RS PRO Tap Fitting, Swivel Tap Aerator for use with M22 Spout End, M24 Spout End

Siemens Water Tap Accessory, Mounting Kit

John Guest Plastic Pipe Fitting, Straight Push Fit Tap Adapter, 22mm, BSP 3/4in

Polyplumb Plastic Pipe Fitting, 90° Tap Adapter 15 x 12.7 mm

John Guest Plastic Pipe Fitting, Straight Tap Adapter 1/4 in

Georg Fischer Galvanised Malleable Iron Fitting Tap Adapter, Female 25.4 mm to Female 25.4 mm

Sferaco Brass Pipe Fitting, Elbow Tap Adapter, Female 12.7 mm to Male 12.7 mm

Georg Fischer Galvanised Malleable Iron Fitting Tap Adapter, Female 12.7 mm to Female 12.7 mm

Georg Fischer Black Oxide Malleable Iron Fitting Tap Adapter, Female G Female BSPP 1/2In 12.7 mm to Female BSPP 12.7 mm

Georg Fischer Black Oxide Malleable Iron Fitting Tap Adapter, Female G Female BSPP 3/4In 19.05 mm to Female BSPP 19.05

Georg Fischer Black Oxide Malleable Iron Fitting Tap Adapter, Female G Female BSPP 1In 25.4 mm to Female BSPP 25.4 mm