Technical Document
Specifications
Brand
MicrochipMemory Size
16Mbit
Interface Type
SPI
Package Type
SOIC
Pin Count
8
Organisation
2M x 8 bit
Mounting Type
Surface Mount
Cell Type
Split Gate
Minimum Operating Supply Voltage
1.65 V
Maximum Operating Supply Voltage
1.95 V
Block Organisation
Symmetrical
Length
4.9mm
Height
1.25mm
Width
3.9mm
Dimensions
4.9 x 3.9 x 1.25mm
Number of Bits per Word
8bit
Maximum Operating Temperature
+85 °C
Series
SST26
Number of Words
2M
Minimum Operating Temperature
-40 °C
Maximum Random Access Time
3ns
Product details
SST26WF040B/080B/016B Serial Quad I/O (SQI) SuperFlash® Flash Memory
From Microchip the SST26WFxxxB family of products are Serial Quad I/O (SQI) Flash Memory devices available in 4-, 8- and 16-bit variants. These devices support full command-set compatibility with Serial Peripheral Interface (SPI) protocol and enable minimum latency Execute-in-Place (XIP) capability without the need for code shadowing on an SRAM. The SST26WFxxxB devices exhibit low power consumption, making them suitable for portable battery powered applications.
Features
Operating Voltage Range 1.6 to 1.95 V
Clock Frequency 104 MHz max
Serial Interface Architecture
Low Power Consumption: Active Read Current: 15 mA (typical at 104 MHz), Standby Current: 10 μA (typical)
Burst Modes: Continuous Linear Burst, 8/16/32/64 Byte Linear Burst with Wrap-Around
Page-Program: 256 Bytes per page in x1 or x4 mode
Fast Erase Time: Sector/Block Erase 18 ms (typ), 25 ms (max); Chip Erase 35 ms (typ), 50 ms (max)
Flexible Erase Capability
End-of-Write Detection
Write-Suspend
Software Protection
Software Reset (RST) Mode
SFDP (Serial Flash Discoverable Parameters)
Flash Memory, Microchip
Stock information temporarily unavailable.
Please check again later.
AED 7.55
Each (Supplied in a Tube) (ex VAT)
AED 7.928
Each (Supplied in a Tube) (inc VAT)
Production pack (Tube)
5
AED 7.55
Each (Supplied in a Tube) (ex VAT)
AED 7.928
Each (Supplied in a Tube) (inc VAT)
Production pack (Tube)
5
Technical Document
Specifications
Brand
MicrochipMemory Size
16Mbit
Interface Type
SPI
Package Type
SOIC
Pin Count
8
Organisation
2M x 8 bit
Mounting Type
Surface Mount
Cell Type
Split Gate
Minimum Operating Supply Voltage
1.65 V
Maximum Operating Supply Voltage
1.95 V
Block Organisation
Symmetrical
Length
4.9mm
Height
1.25mm
Width
3.9mm
Dimensions
4.9 x 3.9 x 1.25mm
Number of Bits per Word
8bit
Maximum Operating Temperature
+85 °C
Series
SST26
Number of Words
2M
Minimum Operating Temperature
-40 °C
Maximum Random Access Time
3ns
Product details
SST26WF040B/080B/016B Serial Quad I/O (SQI) SuperFlash® Flash Memory
From Microchip the SST26WFxxxB family of products are Serial Quad I/O (SQI) Flash Memory devices available in 4-, 8- and 16-bit variants. These devices support full command-set compatibility with Serial Peripheral Interface (SPI) protocol and enable minimum latency Execute-in-Place (XIP) capability without the need for code shadowing on an SRAM. The SST26WFxxxB devices exhibit low power consumption, making them suitable for portable battery powered applications.
Features
Operating Voltage Range 1.6 to 1.95 V
Clock Frequency 104 MHz max
Serial Interface Architecture
Low Power Consumption: Active Read Current: 15 mA (typical at 104 MHz), Standby Current: 10 μA (typical)
Burst Modes: Continuous Linear Burst, 8/16/32/64 Byte Linear Burst with Wrap-Around
Page-Program: 256 Bytes per page in x1 or x4 mode
Fast Erase Time: Sector/Block Erase 18 ms (typ), 25 ms (max); Chip Erase 35 ms (typ), 50 ms (max)
Flexible Erase Capability
End-of-Write Detection
Write-Suspend
Software Protection
Software Reset (RST) Mode
SFDP (Serial Flash Discoverable Parameters)