SICK LFP Cubic Series Guided Radar Level Sensor, Vertical, Polytetrafluoroethylene, Housing PBT

SICK LFP Cubic Series Level Sensor, 1m Cable Length, Vertical Mount Type - LFP2000-A4NMB

This level sensor is a guided radar device designed for vertical mounting to monitor liquid levels in industrial environments. It connects via IO-Link for digital communication and is housed in a Durable plastic PBT enclosure with a polytetrafluoroethylene gasket to resist contact with process media. The unit operates across a wide temperature range and withstands moderate process pressures, making it suitable for integration into automated measurement and control systems.

Features and Benefits:

• IO-Link Interface enables seamless digital integration and diagnostics
  Guided radar principle provides dependable level detection performance
  Operating range from -20°C to +60°C supports varied plant conditions
  Pressure tolerance up to 10 bar allows use in pressurised vessels
  Low current consumption at 100mA reduces load on supply circuits
  Supplied with a 1m cable for immediate connection to control hardware

Applications

• Suitable for tank level monitoring in automation systems
  Ideal for use in electrical control panels requiring digital sensors
  Used with process vessels operating under moderate pressure
  Can be used for liquid level feedback to PLCs via IO-Link
  Suitable for retrofitting Compact measurement points in machinery

What electrical supply limitations should I consider?

The sensor is rated for a maximum DC voltage of 30V and draws up to 100mA during operation, so ensure your supply and wiring meet these limits.

How should the sensor be installed in relation to Vessel orientation?

It is designed for vertical mounting
install perpendicular to the liquid surface for accurate guided radar measurements.

What approvals support installation in industrial sites?

The unit carries cULus approval, indicating conformity with applicable North American safety standards for electrical equipment.

Which materials contact the process medium?

The sealing is MADE from polytetrafluoroethylene and the outer enclosure is plastic PBT, providing chemical compatibility and protection for internal components.