Technical Document
Specifications
Number of Elements per Chip
2
Transistor Type
NPN + PNP
Transistor Configuration
Isolated
Pin Count
6
Mounting Type
Surface Mount
Maximum Emitter Base Voltage
7 V
Maximum Operating Temperature
+150 °C
Maximum Collector Emitter Voltage
50 V
Maximum DC Collector Current
100 mA
Maximum Power Dissipation
300 mW
Dimensions
2.9 x 1.5 x 1.1mm
Brand
PanasonicPackage Type
Mini6 G4 B
Country of Origin
Malaysia
Product details
FI-500 FiberInspector™ Micro
Dirty fibre optic endfaces are the major cause of problems in single-mode and multimode fibre optic systems. The FI-500 FiberInspector™ Micro removes the hassle associated with inspecting fibre end faces, especially in low light and high cable density situations.
FI-500 is designed to simplify the inspection process. The built-in PortBright flashlight helps you find the right port or cable. The small-profile probe fits into tight spots, and features push button controls for simple operation. AutoFocus provides a sharp view of the endface in a few seconds. While the pause button freezes the image on the crisp 320 x 240 display for more detailed inspection.
FI-500 FiberInspector Micro fills the gap between a manual scope and a fully automated inspection scope. It has the simplicity and practicality of a manual inspection scope, but with advanced features to reduce troubleshooting and inspection time.
Features and Benefits
PortBright™ a built-in flashlight illuminates dark areas and dense panels
AutoFocus for stable images in few seconds
Large display to view single-mode and multimode fiber endfaces
Includes 4 UPC tips (LC, SC, 1.25 mm and 2.50 mm)
APC tips available
Display
Magnification: 1x, 2x, 4x
Fps: ≥12
Battery type: Rechargeable NiMH, 2 x 1.2 V, 2700 mAh
Power adapter Input: 100 to 240 V ac ±10%, 50/60 Hz, Output: 6 V dc, 3 A maximum Class II
Display: 3.2" TFT LCD, 320 x 240
Probe
Magnification: 200x Zoom function has 1x, 2x and 4x settings
Camera Type: 5 MP "CMOS sensor
Field of View: 610 μm x 460 μm
Resolution: 1 μm
Light Source: LED, >100000 hr life
Endface Illumination: Coaxial blue LED
Port Illumination: 2 white LEDs
Power: Supplied through the USB interface
Output: Video output through USB 2.0 interface
Accessories:
Supplied with
FiberInspector™ Micro with probe, display, 4 UPC tips, case, rechargeable batteries and universal power adapter
Stock information temporarily unavailable.
Please check again later.
AED 0.80
Each (In a Pack of 20) (ex VAT)
AED 0.84
Each (In a Pack of 20) (inc VAT)
Standard
20
AED 0.80
Each (In a Pack of 20) (ex VAT)
AED 0.84
Each (In a Pack of 20) (inc VAT)
Standard
20
Technical Document
Specifications
Number of Elements per Chip
2
Transistor Type
NPN + PNP
Transistor Configuration
Isolated
Pin Count
6
Mounting Type
Surface Mount
Maximum Emitter Base Voltage
7 V
Maximum Operating Temperature
+150 °C
Maximum Collector Emitter Voltage
50 V
Maximum DC Collector Current
100 mA
Maximum Power Dissipation
300 mW
Dimensions
2.9 x 1.5 x 1.1mm
Brand
PanasonicPackage Type
Mini6 G4 B
Country of Origin
Malaysia
Product details
FI-500 FiberInspector™ Micro
Dirty fibre optic endfaces are the major cause of problems in single-mode and multimode fibre optic systems. The FI-500 FiberInspector™ Micro removes the hassle associated with inspecting fibre end faces, especially in low light and high cable density situations.
FI-500 is designed to simplify the inspection process. The built-in PortBright flashlight helps you find the right port or cable. The small-profile probe fits into tight spots, and features push button controls for simple operation. AutoFocus provides a sharp view of the endface in a few seconds. While the pause button freezes the image on the crisp 320 x 240 display for more detailed inspection.
FI-500 FiberInspector Micro fills the gap between a manual scope and a fully automated inspection scope. It has the simplicity and practicality of a manual inspection scope, but with advanced features to reduce troubleshooting and inspection time.
Features and Benefits
PortBright™ a built-in flashlight illuminates dark areas and dense panels
AutoFocus for stable images in few seconds
Large display to view single-mode and multimode fiber endfaces
Includes 4 UPC tips (LC, SC, 1.25 mm and 2.50 mm)
APC tips available
Display
Magnification: 1x, 2x, 4x
Fps: ≥12
Battery type: Rechargeable NiMH, 2 x 1.2 V, 2700 mAh
Power adapter Input: 100 to 240 V ac ±10%, 50/60 Hz, Output: 6 V dc, 3 A maximum Class II
Display: 3.2" TFT LCD, 320 x 240
Probe
Magnification: 200x Zoom function has 1x, 2x and 4x settings
Camera Type: 5 MP "CMOS sensor
Field of View: 610 μm x 460 μm
Resolution: 1 μm
Light Source: LED, >100000 hr life
Endface Illumination: Coaxial blue LED
Port Illumination: 2 white LEDs
Power: Supplied through the USB interface
Output: Video output through USB 2.0 interface
Accessories:
Supplied with
FiberInspector™ Micro with probe, display, 4 UPC tips, case, rechargeable batteries and universal power adapter