Digitron 2000P Differential Manometer With 2 Pressure Port/s, Max Pressure Measurement 7 bar

Digitron 2023P, 0-7 bar, Differential Manometer

The Digitron 2023P handheld differential manometer takes pressure measurements over a wide range of pressures. It is of robust design, to IP67 with hose connected, and operates between -10 and +50 °C. Features include a backlit display, reinforced silicone keypad and separate battery compartment. The 2023P filters low-level fluctuations to provide a stable display when measuring unsteady pressure levels.

• Accuracy 0.15% rdg + 0.1fs + digit (+20 to +30 °C), 0.15% rdg + 0.15% fs digit (elsewhere)
• 2 inputs via 1/8 BSP (4mm id, 6mm od hose)
• Preset engineering units -mbar, Pa, inH₂O, mH₂O, inHg, mHg, kPa, PSI
• Min/Max recorder and range lock
• Dimensions 155 x 67 x 40 mm
• Weight 180g

Digitron 2000P Series - Manometers

Hand-held manometers series. Features found in the range include:

• Robust design. IP67 with hose connected, operates between -10 and +50°C, backlit 12.7mm display, reinforced silicone key pad and separate battery compartment
• Accuracy: 0.15% rdg + 0.1fs +digit (+20 to +30°C); 0.15% rdg + 0.15% fs digit (elsewhere)
• Connection: 2 inputs via 1/8 BSP (4mm id, 6mm od hose)
• Zeroing absolute user input of local barometric conditions for additional accuracy
• Preset engineering units - mbar, Pa, inH_²O, mH_²O, inHg, mHg, kPa, PSI
• Min/Max & Average recording, range lock & selectable auto off
• Smoothing. Filters low level fluctuations to provide a stable display when measuring unsteady pressure levels
• Automatic leak testing. Instrument measures pressure leakage from a system over a user specified test duration time. At the end of the test time a Pass/Fail message is displayed and logged to memory
• Long battery life. Typically 200 hours (requires 2 x AA batteries, stock no 591-225)
• Dimensions: 155 x 67 x 40mm, weight 180g
• All instruments are supplied with instruction manual.

Model 202xP and 208xP additional features:

• 7 pre-set engineering units
• Range lock, Min / Max recorder
• Smoothing

Model 208xP additional features:

• Automatic leak testing
• 250 memory logging on demand or at preset intervals
• Min/Max and averaging recorder
• 4 digit reference coding of logged data
• Cal function zero
• Infra red serial Interface to connect via DigiLink Interface direct to a serial printer or PC
• User-definable scaling

Notes

1. Requires 2xAA batteries (please see 744-2199 ).
2. Particular care should be taken not to over pressure this device as this may rupture the sensor membrane. This is not covered by the manufacturers warranty.
3. The differential / gauge instruments will only measure positive pressures i.e. positive pressure applied to the positive port, or negative pressure applied to the negative port.
4. Not suitable for use with corrosive substances or cyclic hydrocarbons, e.g. motor oil, transmission fluid and freon. To use these instruments with these fluid components, isolation must be provided in the form of a buffer, such as mineral oil or dry air.

Supplied with

Instruction manual