Fluke 115 Digital Multimeter True RMS

Fluke Digital Multimeter, 600V Safety Category Voltage, 10A Maximum DC Current Measurement - 2583583

This digital multimeter is a handheld instrument designed to measure electrical parameters across industrial and field environments. It offers true RMS measurement capability and supports AC/DC voltage and current, resistance, capacitance, frequency and Basic component tests, operating from battery power for extended periods and suitable for use up to specified ambient temperatures.

Features and Benefits:

• True RMS measurement for accurate AC readings under non‑sinusoidal conditions
  High precision DC voltage accuracy ±0.5%rdg with 0.1mV resolution
  Measures up to 10A AC and DC as an AC current clamp alternative
  Frequency capability to 50kHz for fast signal analysis
  Resistance range to 6000kΩ with 100mΩ resolution for fine detection
  Long battery life of 400h using alkaline cells for extended field use

Applications

• Suitable for verifying 600 V distribution circuits
  Ideal for servicing 10 A AC and DC circuits
  Used for troubleshooting capacitance and continuity faults
  Can be used for frequency checks up to 50 kHz
  Suitable for resistance diagnosis on industrial assemblies

What safety rating does it provide for mains work?

It is rated to CAT III at 600V for use on fixed installations and distribution circuits.

What is the expected power supply and operational duration?

It runs on alkaline batteries and offers approximately 400h of battery life under typical use.

How does it handle small resistance and voltage measurements?

It provides resistance readings up to 6000kΩ with 100mΩ resolution and DC voltage resolution to 0.1mV for precise low‑level measurements.

What accuracy and resolution apply to AC current measurements?

AC current accuracy is ±1.5%rdg+3 digits with a resolution of 0.001A and a maximum of 10A.

Which functions support component testing beyond voltage and current?

It includes capacitance measurement, frequency measurement, diode testing and continuity checks for component and circuit verification.

Notes

For Calibrated Articles - Please note that accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, with relative humidity at 0 % to 95 %.

Contents

TL75 Test leads, holster, user’s manual and 9 V battery (installed).