Technical Documents
Specifications
Brand
FlukeProduct Type
Multi-Function Calibrator
Maximum Voltage Measurement
1000V ac
Accuracy
± 0.02 % + 2 LSD
Port Connections
HART
Maximum Current Measurement
30mA
Battery Life
140h
Battery Type
AA
Power Source
Battery
Safety Category Level
CAT IV, CAT III
Safety Category Voltage
600, 1000V
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
55°C
Height
50mm
Length
203mm
Weight
610g
Hazardous Area Certification
No
Standards/Approvals
IEC 61010-1
Width
100mm
Model Number
789
Resolution
1 mA
Country of Origin
United States
Product Details
This multi-function calibrator combines the measurement capabilities of a true‑rms digital multimeter with mA loop sourcing and simulation for field and workshop use. It is designed for technicians working on current loop control and electrical measurements, offering battery operation, HART connectivity and rugged safety ratings suited to demanding industrial environments.
It can source up to 20.000mA from internal AA batteries and simulate up to 20.000mA using an external 15–48V loop supply, both able to overrange to 24.000mA.
Operational limits span -20°C to 55°C with a specified temperature coefficient of 0.05xaccuracy per °C outside 18–28°C.
The instrument meets IEC61010‑1 safety standards and is rated CAT IV600V/CAT III1000V with Pollution Degree2 specifications.
It provides simultaneous mA and percentage‑of‑scale readouts, min/max/average/hold/relative modes, and true‑rms AC measurement to 1000V.
Internal output offers 24V compliance or 1200Ω drive at 20mA, while the 24V loop supply delivers greater than 24V into 250Ω at 20mA.
AC175 alligator clips, AA 1.5 V alkaline batteries (x4, installed), TL71 safety-designed test lead set
Stock information temporarily unavailable.
P.O.A.
Calibration type
No Calibration
1
P.O.A.
Stock information temporarily unavailable.
Calibration type
No Calibration
1
Technical Documents
Specifications
Brand
FlukeProduct Type
Multi-Function Calibrator
Maximum Voltage Measurement
1000V ac
Accuracy
± 0.02 % + 2 LSD
Port Connections
HART
Maximum Current Measurement
30mA
Battery Life
140h
Battery Type
AA
Power Source
Battery
Safety Category Level
CAT IV, CAT III
Safety Category Voltage
600, 1000V
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
55°C
Height
50mm
Length
203mm
Weight
610g
Hazardous Area Certification
No
Standards/Approvals
IEC 61010-1
Width
100mm
Model Number
789
Resolution
1 mA
Country of Origin
United States
Product Details
This multi-function calibrator combines the measurement capabilities of a true‑rms digital multimeter with mA loop sourcing and simulation for field and workshop use. It is designed for technicians working on current loop control and electrical measurements, offering battery operation, HART connectivity and rugged safety ratings suited to demanding industrial environments.
It can source up to 20.000mA from internal AA batteries and simulate up to 20.000mA using an external 15–48V loop supply, both able to overrange to 24.000mA.
Operational limits span -20°C to 55°C with a specified temperature coefficient of 0.05xaccuracy per °C outside 18–28°C.
The instrument meets IEC61010‑1 safety standards and is rated CAT IV600V/CAT III1000V with Pollution Degree2 specifications.
It provides simultaneous mA and percentage‑of‑scale readouts, min/max/average/hold/relative modes, and true‑rms AC measurement to 1000V.
Internal output offers 24V compliance or 1200Ω drive at 20mA, while the 24V loop supply delivers greater than 24V into 250Ω at 20mA.
AC175 alligator clips, AA 1.5 V alkaline batteries (x4, installed), TL71 safety-designed test lead set
