Greenwich Instruments GSM 2 Stepper Motor Controller 2 A, 61 x 46 x 15mm
Technical Document
Specifications
Current Rating
2 A
Overall Length
61mm
Overall Width
46mm
Overall Depth
15mm
Country of Origin
United Kingdom
Product details
GSM2 Stepper Motor Drive Board
The GSM2 is a standalone drive board designed to drive a stepper motor in unipolar mode. It is done either with or without forcing resistors connected between motor commons and volts. When using the logic connections, you are able to select full, half or wave mode and direction and speed external clock. The GSM2 drive board allows an enable and disable input for various start/stop control options. The stepper motor used with the board must also have four phases and five, six or eight wires.
Features & Benefits
A stand alone drive board designed to drive a stepper motor in unipolar mode.
Directly compatible with any of the RS stepper motors up to 2A
4-phase unipolar motor drive up to 2A/40Vdc per phase
Full, half and wave modes selectable
Motor speed selectable via adjustable on-board clock or externally via logic connectors
Enable and disable inputs allow a variety of start/stop control options to be implemented
Logic input/outputs TTL LS and CMOS compatible
Open drain power MOSFET phase outputs
Supplied with
User instructions
Stock information temporarily unavailable.
Please check again later.
AED 791.60
Each (ex VAT)
AED 831.18
Each (inc. VAT)
1
AED 791.60
Each (ex VAT)
AED 831.18
Each (inc. VAT)
1
Technical Document
Specifications
Current Rating
2 A
Overall Length
61mm
Overall Width
46mm
Overall Depth
15mm
Country of Origin
United Kingdom
Product details
GSM2 Stepper Motor Drive Board
The GSM2 is a standalone drive board designed to drive a stepper motor in unipolar mode. It is done either with or without forcing resistors connected between motor commons and volts. When using the logic connections, you are able to select full, half or wave mode and direction and speed external clock. The GSM2 drive board allows an enable and disable input for various start/stop control options. The stepper motor used with the board must also have four phases and five, six or eight wires.
Features & Benefits
A stand alone drive board designed to drive a stepper motor in unipolar mode.
Directly compatible with any of the RS stepper motors up to 2A
4-phase unipolar motor drive up to 2A/40Vdc per phase
Full, half and wave modes selectable
Motor speed selectable via adjustable on-board clock or externally via logic connectors
Enable and disable inputs allow a variety of start/stop control options to be implemented
Logic input/outputs TTL LS and CMOS compatible
Open drain power MOSFET phase outputs
Supplied with
User instructions