Huber+Suhner Straight 50Ω RF Adapter PC3.5 Plug to PC3.5 Socket 33GHz
Technical Document
Specifications
Brand
Huber+SuhnerAdapter Type
PC 3.5 Plug to PC 3.5 Socket
Adapter Type A
PC3.5
Adapter Type B
PC3.5
Gender A
Male
Gender B
Female
Impedance
50Ω
Body Orientation
Straight
Polarity
Normal
Operating Frequency
33GHz
Contact Plating
Gold over Enickel
Length
29.53mm
Contact Material
Beryllium Copper, Stainless Steel
Country of Origin
Switzerland
Product details
Hubner+Suhner Adaptors for QMA interfaces
Hubner+Suhner adaptors are used within measuring applications with QMA interfaces. These versatile adaptors support the calibration with Hubne+Suhner open standard interfaces, incorporating the same electrical length and the same return loss behaviour of all this series of adaptors the swapping method can be utilised.
Identical electrical length
Fast measurement set-up change: e.g. male to female
Measure devices with QMA interfaces
Precise calibration for phase critical measurements
50Ω, 18 GHz
HUBER+SUHNER QMA
The interface is based on the SMA dimensions, but instead of a threaded coupling mechanism, a new snap-lock mechanism is used.The QMA interface has a very similar performance to the SMA, but in addition it offers an easier, faster and safer coupling operation, resulting in significant time saving during the production of systems. The packaging density of QMA is increased compared to SMA connectors as no torque spanner is required to fasten the coupling nut.
Stock information temporarily unavailable.
Please check again later.
AED 933.25
Each (ex VAT)
AED 979.91
Each (inc. VAT)
1
AED 933.25
Each (ex VAT)
AED 979.91
Each (inc. VAT)
1
Technical Document
Specifications
Brand
Huber+SuhnerAdapter Type
PC 3.5 Plug to PC 3.5 Socket
Adapter Type A
PC3.5
Adapter Type B
PC3.5
Gender A
Male
Gender B
Female
Impedance
50Ω
Body Orientation
Straight
Polarity
Normal
Operating Frequency
33GHz
Contact Plating
Gold over Enickel
Length
29.53mm
Contact Material
Beryllium Copper, Stainless Steel
Country of Origin
Switzerland
Product details
Hubner+Suhner Adaptors for QMA interfaces
Hubner+Suhner adaptors are used within measuring applications with QMA interfaces. These versatile adaptors support the calibration with Hubne+Suhner open standard interfaces, incorporating the same electrical length and the same return loss behaviour of all this series of adaptors the swapping method can be utilised.
Identical electrical length
Fast measurement set-up change: e.g. male to female
Measure devices with QMA interfaces
Precise calibration for phase critical measurements
50Ω, 18 GHz
HUBER+SUHNER QMA
The interface is based on the SMA dimensions, but instead of a threaded coupling mechanism, a new snap-lock mechanism is used.The QMA interface has a very similar performance to the SMA, but in addition it offers an easier, faster and safer coupling operation, resulting in significant time saving during the production of systems. The packaging density of QMA is increased compared to SMA connectors as no torque spanner is required to fasten the coupling nut.