Technical Documents
Specifications
Brand
LappProduct Type
Control Cable
Series
OLFLEX ROBUST 210
Number of Cores
2
Conductor Material
Bare Copper
Jacket Material
Thermoplastic Elastomer
Jacket Colour
Black
Screened/Unscreened
Unscreened
Cable Length
50m
Conductor Type
Stranded
Standards/Approvals
No
American Wire Gauge
16AWG
Country of Origin
Germany
Product Details
The Lapp OLFLEX Classic 210 are control cables for flexible use. They are suitable for outdoor use if the indicated temperature range is observed. At room temperature they are increased resistant to the effects of acids alkalis and oils as well as greases and plant animal mineral or synthetic based waxes. They are suitable for constant use in fresh water to a depth of 10 m and at a maximum water temperature of 40°C according to EN 505652. The maximum tensile load is 15 N/mm² of conductor cross-section during installation and operation. Compulsory guidance is not permitted.
Stock information temporarily unavailable.
AED 903.67
AED 903.67 1 Reel of 50 Metres (ex VAT)
AED 948.85
AED 948.85 1 Reel of 50 Metres (inc. VAT)
1
AED 903.67
AED 903.67 1 Reel of 50 Metres (ex VAT)
AED 948.85
AED 948.85 1 Reel of 50 Metres (inc. VAT)
Stock information temporarily unavailable.
1
Technical Documents
Specifications
Brand
LappProduct Type
Control Cable
Series
OLFLEX ROBUST 210
Number of Cores
2
Conductor Material
Bare Copper
Jacket Material
Thermoplastic Elastomer
Jacket Colour
Black
Screened/Unscreened
Unscreened
Cable Length
50m
Conductor Type
Stranded
Standards/Approvals
No
American Wire Gauge
16AWG
Country of Origin
Germany
Product Details
The Lapp OLFLEX Classic 210 are control cables for flexible use. They are suitable for outdoor use if the indicated temperature range is observed. At room temperature they are increased resistant to the effects of acids alkalis and oils as well as greases and plant animal mineral or synthetic based waxes. They are suitable for constant use in fresh water to a depth of 10 m and at a maximum water temperature of 40°C according to EN 505652. The maximum tensile load is 15 N/mm² of conductor cross-section during installation and operation. Compulsory guidance is not permitted.
