Lapp ÖLFLEX SERVO 2YSLCY Control Cable, 4 Cores, 2.5 mm², CY, Screened, 50m, Transparent PVC Sheath, 13 AWG

RS Stock No.: 144-872Brand: LappManufacturers Part No.: 36426
brand-logo
View all in Control Cable

Technical Document

Specifications

Brand

Lapp

Series

ÖLFLEX SERVO 2YSLCY

Number of Cores

4

Cross Sectional Area

2.5 mm²

Screened/Unscreened

Screened

Length

50m

Control Cable Type

CY

Sheath Colour

Transparent

CPR Certification

Eca

American Wire Gauge

13 AWG

Outer Diameter

12.4mm

Sheath Material

PVC

Current Rating

26 A

Conductor Material

Copper

Voltage Rating

600/1000 V

Bedding Material

Aluminium Foil

Earth Cable

Yes

Screen Type

Tinned Copper Braid

Maximum Operating Temperature

+70°C

Core Strands

50/0.25 mm

Conductor Resistance

7.98 Ω/km

Insulation material

PE

Minimum Bend Radius

Fixed - 4 x D Occasional flexing - 15 x D

Minimum Operating Temperature

-40°C

Filler Material

Non-Wicking Filler

Country of Origin

Germany

Product details

Ölflex Servo High EMC Low Capacitance Cable

Olflex® Servo 2YSLCY is a flexible cable having special EMC performance resulting from the double-shielded, low capacitance design. Ideal for frequency converters and AC motors. PE insulated cables show significant reduction of reactive power; always needed for charging and discharging the cable during operation of the frequency converter. The design also improves EMC noise for the whole drive system.Cables are suitable for use in dry, damp and wet rooms/locations. Good resistance against acids, caustic solutions and certain oils at room temperature. Suitable for free or static use. Not suitable for continuously moving appliances under tensile load unless the cable is adequately supported/guided.

Fine wire stranded conductor of bare copper, in accordance with IEC 60228 resp. VDE 0295 CI. 5
Transparent polyethylene (PE) 2YI2 insulation in accordance to VDE 0207-2
Colour code in accordance with HD 308 S2 NDE 0293-308; conductors colour coded, with one green/yellow conductor
4 cores (3 conductors plus earth) twisted together in one layer
Aluminium-Mylar® tape wrap screening, metal-side outwards, on top a tinned copper wire braid sheath. Sheath made of PVC compound YM2 in accordance with VDE 0207-5
Lead-free, flame-retardant and self-extinguishing. Flame retardant and self-extinguishing properties to IEC 60332.1

Standards

This cable confirms to ECD 73/23/EEC (low voltage directive).

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

AED 2,024.85

1 Reel of 50 Metres (ex VAT)

AED 2,126.09

1 Reel of 50 Metres (inc VAT)

Lapp ÖLFLEX SERVO 2YSLCY Control Cable, 4 Cores, 2.5 mm², CY, Screened, 50m, Transparent PVC Sheath, 13 AWG

AED 2,024.85

1 Reel of 50 Metres (ex VAT)

AED 2,126.09

1 Reel of 50 Metres (inc VAT)

Lapp ÖLFLEX SERVO 2YSLCY Control Cable, 4 Cores, 2.5 mm², CY, Screened, 50m, Transparent PVC Sheath, 13 AWG
Stock information temporarily unavailable.

Technical Document

Specifications

Brand

Lapp

Series

ÖLFLEX SERVO 2YSLCY

Number of Cores

4

Cross Sectional Area

2.5 mm²

Screened/Unscreened

Screened

Length

50m

Control Cable Type

CY

Sheath Colour

Transparent

CPR Certification

Eca

American Wire Gauge

13 AWG

Outer Diameter

12.4mm

Sheath Material

PVC

Current Rating

26 A

Conductor Material

Copper

Voltage Rating

600/1000 V

Bedding Material

Aluminium Foil

Earth Cable

Yes

Screen Type

Tinned Copper Braid

Maximum Operating Temperature

+70°C

Core Strands

50/0.25 mm

Conductor Resistance

7.98 Ω/km

Insulation material

PE

Minimum Bend Radius

Fixed - 4 x D Occasional flexing - 15 x D

Minimum Operating Temperature

-40°C

Filler Material

Non-Wicking Filler

Country of Origin

Germany

Product details

Ölflex Servo High EMC Low Capacitance Cable

Olflex® Servo 2YSLCY is a flexible cable having special EMC performance resulting from the double-shielded, low capacitance design. Ideal for frequency converters and AC motors. PE insulated cables show significant reduction of reactive power; always needed for charging and discharging the cable during operation of the frequency converter. The design also improves EMC noise for the whole drive system.Cables are suitable for use in dry, damp and wet rooms/locations. Good resistance against acids, caustic solutions and certain oils at room temperature. Suitable for free or static use. Not suitable for continuously moving appliances under tensile load unless the cable is adequately supported/guided.

Fine wire stranded conductor of bare copper, in accordance with IEC 60228 resp. VDE 0295 CI. 5
Transparent polyethylene (PE) 2YI2 insulation in accordance to VDE 0207-2
Colour code in accordance with HD 308 S2 NDE 0293-308; conductors colour coded, with one green/yellow conductor
4 cores (3 conductors plus earth) twisted together in one layer
Aluminium-Mylar® tape wrap screening, metal-side outwards, on top a tinned copper wire braid sheath. Sheath made of PVC compound YM2 in accordance with VDE 0207-5
Lead-free, flame-retardant and self-extinguishing. Flame retardant and self-extinguishing properties to IEC 60332.1

Standards

This cable confirms to ECD 73/23/EEC (low voltage directive).