Pepperl + Fuchs Glass Fibre Optic Sensor 300 mm, Push Pull Output, IP67, 10 → 30 V dc
Technical Document
Specifications
Brand
Pepperl + FuchsDetection Range
300 mm
Output Type
Push Pull
Fibre Optic Type
Glass
Response Time
1 ms
Light Source
Red LED
Electrical Connection
M12 4-Pin
Switching Frequency
500 Hz
IP Rating
IP67
Housing Material
Nickel Plated Brass
Supply Voltage
10 → 30 V dc
Length
78mm
Width
11.2mm
Minimum Operating Temperature
-25°C
Dimensions
78 x 11.2 x 7.8 mm
Depth
7.8mm
Maximum Operating Temperature
+70°C
Country of Origin
Germany
Product details
M18 Fibre Amplifier
Pepperl & Fuchs VL18LL series fibre optic sensors offer many advantages, in particular for picking up small parts or in positions difficult to access. Suitable for use in rough environmental conditions, such as high temperatures or explosive conditions.
Depending on the fibre optic connected, the optical properties correspond to a single-path light barrier or a reflection light barrier. Single-path systems have one fibre optic each for transmitter and receiver. For reflection systems, the light is guided in a single fibre optic through separate transmitter and receiver fibres.
Light/dark switch as potentiometer
Clearly arranged control panel
Protection class 2
Not sensitive to ambient light, even with switched energy saving lamps
Multiple device installation possible, no mutual interference
Flashing power on LED in case of short-circuit
M12 connector 4 pin
Stock information temporarily unavailable.
Please check again later.
AED 636.15
AED 636.15 Each (ex VAT)
AED 667.96
AED 667.96 Each (inc. VAT)
1
AED 636.15
AED 636.15 Each (ex VAT)
AED 667.96
AED 667.96 Each (inc. VAT)
1
Technical Document
Specifications
Brand
Pepperl + FuchsDetection Range
300 mm
Output Type
Push Pull
Fibre Optic Type
Glass
Response Time
1 ms
Light Source
Red LED
Electrical Connection
M12 4-Pin
Switching Frequency
500 Hz
IP Rating
IP67
Housing Material
Nickel Plated Brass
Supply Voltage
10 → 30 V dc
Length
78mm
Width
11.2mm
Minimum Operating Temperature
-25°C
Dimensions
78 x 11.2 x 7.8 mm
Depth
7.8mm
Maximum Operating Temperature
+70°C
Country of Origin
Germany
Product details
M18 Fibre Amplifier
Pepperl & Fuchs VL18LL series fibre optic sensors offer many advantages, in particular for picking up small parts or in positions difficult to access. Suitable for use in rough environmental conditions, such as high temperatures or explosive conditions.
Depending on the fibre optic connected, the optical properties correspond to a single-path light barrier or a reflection light barrier. Single-path systems have one fibre optic each for transmitter and receiver. For reflection systems, the light is guided in a single fibre optic through separate transmitter and receiver fibres.
Light/dark switch as potentiometer
Clearly arranged control panel
Protection class 2
Not sensitive to ambient light, even with switched energy saving lamps
Multiple device installation possible, no mutual interference
Flashing power on LED in case of short-circuit
M12 connector 4 pin