Phoenix Contact 3RS7003 Series Signal Conditioner, Current, Voltage Input, Current Output, 24V dc Supply, ATEX
Technical Document
Specifications
Brand
Phoenix ContactModule Type
Isolation Amplifier
Input Signal Type
Current, Voltage
Output Signal Type
Current
Input Range
0 → 10 V, 0 → 20mA
Output Range
0 → 20mA
Supply Voltage
24V dc
Hazardous Area Certification
ATEX
Mounting Type
DIN Rail Mount
Operating Temperature Range
-20 → +60°C
Series
3RS7003
Number of Channels
2
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+60°C
Distrelec Product Id
17689715
Country of Origin
Germany
Product details
4-way Isolated Signal Duplicator
Phoenix Contacts signal duplicator is a great conditioner for isolation and duplication of analog signals. The 2864176 is a mini 6.2mm width & is easily installed via a DIN rail mount with an option to connect to a TBUS DIN rail connector. This signal duplicator is backed by an Ex-zone 2 rating allowing it to be installed in potentially explosive areas.
2864176 also has a diagnostic LED located on the front. A red LED will flash if there is an error with the device.
Features and benefits:
- Configurable 4-way isolating amplifier
- Thin 6.2mm housing width
- Ex-zone 2 approval
- DIP switch allows configuration of up to 8 signal combinations
- Duplication of a standard analog signal on two current outputs
ATEX and zone 2:
The ATEX standard is the name given to European directives. 99/92/EC and 94/9/EC. Zone 2 is an area that is classified that an explosion could happen with air or flammable substances, however if it did occur it would only happen for a short time.
Accessories:
TBUS DIN rail connector – 489-2825
Power terminal block – 489-2926
AED 1,483.60
AED 1,483.60 Each (ex VAT)
AED 1,557.78
AED 1,557.78 Each (inc. VAT)
1
AED 1,483.60
AED 1,483.60 Each (ex VAT)
AED 1,557.78
AED 1,557.78 Each (inc. VAT)
1
Stock information temporarily unavailable.
Please check again later.
Technical Document
Specifications
Brand
Phoenix ContactModule Type
Isolation Amplifier
Input Signal Type
Current, Voltage
Output Signal Type
Current
Input Range
0 → 10 V, 0 → 20mA
Output Range
0 → 20mA
Supply Voltage
24V dc
Hazardous Area Certification
ATEX
Mounting Type
DIN Rail Mount
Operating Temperature Range
-20 → +60°C
Series
3RS7003
Number of Channels
2
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+60°C
Distrelec Product Id
17689715
Country of Origin
Germany
Product details
4-way Isolated Signal Duplicator
Phoenix Contacts signal duplicator is a great conditioner for isolation and duplication of analog signals. The 2864176 is a mini 6.2mm width & is easily installed via a DIN rail mount with an option to connect to a TBUS DIN rail connector. This signal duplicator is backed by an Ex-zone 2 rating allowing it to be installed in potentially explosive areas.
2864176 also has a diagnostic LED located on the front. A red LED will flash if there is an error with the device.
Features and benefits:
- Configurable 4-way isolating amplifier
- Thin 6.2mm housing width
- Ex-zone 2 approval
- DIP switch allows configuration of up to 8 signal combinations
- Duplication of a standard analog signal on two current outputs
ATEX and zone 2:
The ATEX standard is the name given to European directives. 99/92/EC and 94/9/EC. Zone 2 is an area that is classified that an explosion could happen with air or flammable substances, however if it did occur it would only happen for a short time.
Accessories:
TBUS DIN rail connector – 489-2825
Power terminal block – 489-2926