Rosemount 2120 Series Fork Level Switch Vibrating Level Switch, Side or Top Mount, Glass Filled Nylon Body
Technical Document
Specifications
Brand
RosemountDevice Type
Fork Level Switch
Mounting Type
Side or Top Mount
Body Material
Glass Filled Nylon
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+150°C
Maximum Pressure
100bar
Gasket Material
Non Asbestos Carbon Fibre
Series
2120
Standards Met
ABS, ATEX, CE, CSA, FM, GL, SIL, SRS
Country of Origin
United Kingdom
Product details
Rosemount 2120 Vibrating Level Switch
The 2120 is a popular choice for its simplicity, ease-of-use, and reliability, in high and low level alarm applications.
When used as a low level alarm, the liquid in the tank or pipe drains down past the fork, causing a change of natural frequency that is detected by the electronics and switches the output state.
When used as a high level alarm, the liquid rises in the tank or pipe, making contact with the fork which then causes the output state to switch.
8/16 mA (’Off’/’On’), Direct Load, PNP, Relay, or NAMUR switched output electronics (depending on version)
Threaded process connection for side, top, or bottom mounting
2 off M20 conduit entries for supplied cable gland and blanking plug (cable not supplied)
Easy selection of Dry ’On’ or Wet ’On’ Mode and Switching Delay
Magnetic test point makes functional test easy
Vibrating Liquid Level Switches
Stock information temporarily unavailable.
Please check again later.
AED 2,925.70
Each (ex VAT)
AED 3,071.98
Each (inc VAT)
1
AED 2,925.70
Each (ex VAT)
AED 3,071.98
Each (inc VAT)
1
Technical Document
Specifications
Brand
RosemountDevice Type
Fork Level Switch
Mounting Type
Side or Top Mount
Body Material
Glass Filled Nylon
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+150°C
Maximum Pressure
100bar
Gasket Material
Non Asbestos Carbon Fibre
Series
2120
Standards Met
ABS, ATEX, CE, CSA, FM, GL, SIL, SRS
Country of Origin
United Kingdom
Product details
Rosemount 2120 Vibrating Level Switch
The 2120 is a popular choice for its simplicity, ease-of-use, and reliability, in high and low level alarm applications.
When used as a low level alarm, the liquid in the tank or pipe drains down past the fork, causing a change of natural frequency that is detected by the electronics and switches the output state.
When used as a high level alarm, the liquid rises in the tank or pipe, making contact with the fork which then causes the output state to switch.
8/16 mA (’Off’/’On’), Direct Load, PNP, Relay, or NAMUR switched output electronics (depending on version)
Threaded process connection for side, top, or bottom mounting
2 off M20 conduit entries for supplied cable gland and blanking plug (cable not supplied)
Easy selection of Dry ’On’ or Wet ’On’ Mode and Switching Delay
Magnetic test point makes functional test easy