RS PRO 680 μF Capacitor 400V dc, Snap-in

RS PRO 680 μF Electrolytic Capacitor 400 V DC, Through Hole Type

Searching for a capacitor with a high capacitance value? This electrolytic capacitor from RS PRO uses electrolytes to create electrostatic fields and store power and has a higher capacitance value than an electrostatic capacitor.
The capacitor features a safety vent construction so gas can escape, which prevents it from exploding when the voltage exceeds the specified value. The unit is a through-hole component and you install it by running its leads through your printed circuit board (PCB). This increases the capacitor's resistance to environmental stress.
You can see electrolytic capacitors like this one used for decoupling in electric supply, preventing voltage fluctuations in filtering appliances and storing power in devices such as flash lamps. It also meets Electrostatic Control Standards ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007, which means the risk of electrostatic discharge is reduced.

Features and Benefits

• Capacitance of 680 μF
• Diameter of 35 mm
• Height of 55 mm
• Length of 55 mm
• Dissipation factor of 0.2
• Lead pitch of 10 mm
• Coefficient variance (CV) of less than or equal to 0.02 at 5 min leakage current
• Lifetime of 2000 h
• Maximum operating temperature of +105°C
• Minimum operating temperature of -25°C
• Through-hole mounting type
• Polarised
• Ripple current of 2.37 A
• Electrolytic technology
• Tolerance of ±20%
• Voltage of 400 V DC