Technical Documents
Specifications
Brand
RS ProMaximum Pressure Measurement
4bar
Product Type
Pressure Switch
Minimum Pressure Measurement
0bar
Accuracy
0.5 %
Analogue Output
4 to 20 mA
Maximum Supply Voltage
30V dc
Standards/Approvals
EAC
Housing Material
Stainless Steel
Mount Type
Flush
Maximum Operating Temperature
125°C
IP Rating
IP65
Country of Origin
Germany
Product Details
This RS PRO pressure switch can measure the pressure exerted by liquid and gaseous media from 0 bar to 4 bar. The sensor's case is made from 303-grade stainless steel, so it won't be corroded by contact with the gas or liquid being measured, or contaminate the medium.
It converts pressure into an analogue electrical signal of 4 mA to 20 mA, which is directly proportional to the pressure being measured. A 1/4-inch threaded connector physically connects the switch to the pressure chamber. Electrical connections are made using a two-wire output via cable gland and screw terminal or M12 connector. You can power the sensor with a DC voltage of between 10 V and 30 V.
You'll find this product can be used in temperatures from -20°C to +125°C. These characteristics make it suitable for use in a wide range of applications, including the medical, aviation, automotive, and marine fields.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Stock information temporarily unavailable.
AED 911.37
AED 911.37 Each (ex VAT)
AED 956.94
AED 956.94 Each (inc. VAT)
1
AED 911.37
AED 911.37 Each (ex VAT)
AED 956.94
AED 956.94 Each (inc. VAT)
Stock information temporarily unavailable.
1
Technical Documents
Specifications
Brand
RS ProMaximum Pressure Measurement
4bar
Product Type
Pressure Switch
Minimum Pressure Measurement
0bar
Accuracy
0.5 %
Analogue Output
4 to 20 mA
Maximum Supply Voltage
30V dc
Standards/Approvals
EAC
Housing Material
Stainless Steel
Mount Type
Flush
Maximum Operating Temperature
125°C
IP Rating
IP65
Country of Origin
Germany
Product Details
This RS PRO pressure switch can measure the pressure exerted by liquid and gaseous media from 0 bar to 4 bar. The sensor's case is made from 303-grade stainless steel, so it won't be corroded by contact with the gas or liquid being measured, or contaminate the medium.
It converts pressure into an analogue electrical signal of 4 mA to 20 mA, which is directly proportional to the pressure being measured. A 1/4-inch threaded connector physically connects the switch to the pressure chamber. Electrical connections are made using a two-wire output via cable gland and screw terminal or M12 connector. You can power the sensor with a DC voltage of between 10 V and 30 V.
You'll find this product can be used in temperatures from -20°C to +125°C. These characteristics make it suitable for use in a wide range of applications, including the medical, aviation, automotive, and marine fields.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
