Siemens Cover for use with 5SH5 5 MCB, 5ST3 7 MCB

RS Stock No.: 521-5061Brand: SiemensManufacturers Part No.: 5ST3748
brand-logo
View all in Circuit Breaker Accessories

Technical Document

Specifications

Brand

Siemens

Accessory Type

Cover

For Use With

5SH5 5 MCB, 5ST3 7 MCB

Range

Sentron

Country of Origin

Germany

Product details

Series 5ST3 7 Bus-Bar System

With pin connections
Cut-to-length bar
For 1 or 3-phase line protective switches of the series 5SJ6 and 5SY
No additional connection terminal required for stranded connection up to 35mm²
Excellent accessibility for feeder cable
50→90A load at infeed single-sided/in-centre for 10mm²; 65→120A for 16mm²
Pin type connection
Material: Cu (10mm²); 16mm² fully insulated
Lug spacing: 18mm

Standards

DIN 57606, DIN 57659

Siemens Distribution Boards & Accessories

Type B characteristic offers instantaneous short circuit response level of 3-5 x normal rated current, making it suitable for circuits with moderate inrush currents such as filament lamps, heating loads and most domestic/small building protection applications.,Type C characteristic offers short circuit response of 5-10 x normal rated current, making it ideal for circuits with higher inrush currents such as motor control and fluorescent lighting installations in industrial buildings where nuisance tripping might occur if a faster type was used.

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

AED 6.25

Each (ex VAT)

AED 6.56

Each (inc VAT)

Siemens Cover for use with 5SH5 5 MCB, 5ST3 7 MCB

AED 6.25

Each (ex VAT)

AED 6.56

Each (inc VAT)

Siemens Cover for use with 5SH5 5 MCB, 5ST3 7 MCB
Stock information temporarily unavailable.

Technical Document

Specifications

Brand

Siemens

Accessory Type

Cover

For Use With

5SH5 5 MCB, 5ST3 7 MCB

Range

Sentron

Country of Origin

Germany

Product details

Series 5ST3 7 Bus-Bar System

With pin connections
Cut-to-length bar
For 1 or 3-phase line protective switches of the series 5SJ6 and 5SY
No additional connection terminal required for stranded connection up to 35mm²
Excellent accessibility for feeder cable
50→90A load at infeed single-sided/in-centre for 10mm²; 65→120A for 16mm²
Pin type connection
Material: Cu (10mm²); 16mm² fully insulated
Lug spacing: 18mm

Standards

DIN 57606, DIN 57659

Siemens Distribution Boards & Accessories

Type B characteristic offers instantaneous short circuit response level of 3-5 x normal rated current, making it suitable for circuits with moderate inrush currents such as filament lamps, heating loads and most domestic/small building protection applications.,Type C characteristic offers short circuit response of 5-10 x normal rated current, making it ideal for circuits with higher inrush currents such as motor control and fluorescent lighting installations in industrial buildings where nuisance tripping might occur if a faster type was used.