SKF HK 4020 40mm I.D Needle Needle Roller Bearing, 47mm O.D
Technical Document
Specifications
Brand
SKFInside Diameter
40mm
Outside Diameter
47mm
Roller Bearing Type
Needle
Race Width
20mm
Bore Type
Parallel
Material
Steel
Static Load Rating
53kN
Cage Material
Sheet Steel
Number of Rows
1
Dynamic Load Rating
24.2kN
End Type
Open
Reference Speed
6300rpm
Limiting Speed
7000rpm
Maximum Speed - Grease
5000rpm
Fatigue Limit Load
6.4kN
Maximum Speed - Oil
7000rpm
Country of Origin
Germany
Product details
SKF Drawn Cup Needle Roller Bearings Series HK
SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity.
Generally used directly on the shaft, which is hardened and ground. Can also be combined with an inner ring for shaft that is not hardened
Used when the housing bore cannot be used as a raceway for a needle roller cage assembly, but where a very compact and economic bearing arrangement is required
AED 61.37
AED 61.37 Each (ex VAT)
AED 64.44
AED 64.44 Each (inc. VAT)
1
AED 61.37
AED 61.37 Each (ex VAT)
AED 64.44
AED 64.44 Each (inc. VAT)
1
Stock information temporarily unavailable.
Please check again later.
| quantity | Unit price |
|---|---|
| 1 - 4 | AED 61.37 |
| 5 - 9 | AED 58.80 |
| 10 - 24 | AED 57.59 |
| 25+ | AED 57.17 |
Technical Document
Specifications
Brand
SKFInside Diameter
40mm
Outside Diameter
47mm
Roller Bearing Type
Needle
Race Width
20mm
Bore Type
Parallel
Material
Steel
Static Load Rating
53kN
Cage Material
Sheet Steel
Number of Rows
1
Dynamic Load Rating
24.2kN
End Type
Open
Reference Speed
6300rpm
Limiting Speed
7000rpm
Maximum Speed - Grease
5000rpm
Fatigue Limit Load
6.4kN
Maximum Speed - Oil
7000rpm
Country of Origin
Germany
Product details
SKF Drawn Cup Needle Roller Bearings Series HK
SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity.
Generally used directly on the shaft, which is hardened and ground. Can also be combined with an inner ring for shaft that is not hardened
Used when the housing bore cannot be used as a raceway for a needle roller cage assembly, but where a very compact and economic bearing arrangement is required