STMicroelectronics Battery Charger, Energy Harvesting for SPV1050

RS Stock No.: 875-0898Brand: STMicroelectronicsManufacturers Part No.: STEVAL-ISV019V1
brand-logo

Technical Document

Specifications

Power Management Function

Battery Charger, Energy Harvesting

Kit Classification

Evaluation Board

Featured Device

SPV1050

Product details

SPV1050 ULP Energy Harvester and Battery Charger Evaluation Board, STMicroelectronics

The STEVAL-ISV019V1 is an Evaluation Board based on the SPV1050, an Ultra Low Power (ULP) energy harvester and battery charger with embedded MPPT and LDO (Low Dropout) Regulators.
The evaluation board is working at the best efficiency implementing the MPPT (Maximum Power Point Tracking) DC-DC converter configuration.
It is optimized to harvest energy from Photovoltaic (PV) panels supplying 0.5V to 2.5V and 30μA to 20mA. You can charge a battery with 3.7V under-voltage protection threshold and 4.2V end of charge voltage threshold. Operating flexibility is possible for a different PV panel and battery with a few easy board changes on the application components.

First start-up at 500mV input
150mV to 4.25V input working voltage range
4.25V end of charge battery voltage
3.7V battery under-voltage protection

Battery Charging & Monitoring, STMicroelectronics

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

AED 210.85

Each (ex VAT)

AED 221.39

Each (inc. VAT)

STMicroelectronics Battery Charger, Energy Harvesting for SPV1050

AED 210.85

Each (ex VAT)

AED 221.39

Each (inc. VAT)

STMicroelectronics Battery Charger, Energy Harvesting for SPV1050
Stock information temporarily unavailable.

Technical Document

Specifications

Power Management Function

Battery Charger, Energy Harvesting

Kit Classification

Evaluation Board

Featured Device

SPV1050

Product details

SPV1050 ULP Energy Harvester and Battery Charger Evaluation Board, STMicroelectronics

The STEVAL-ISV019V1 is an Evaluation Board based on the SPV1050, an Ultra Low Power (ULP) energy harvester and battery charger with embedded MPPT and LDO (Low Dropout) Regulators.
The evaluation board is working at the best efficiency implementing the MPPT (Maximum Power Point Tracking) DC-DC converter configuration.
It is optimized to harvest energy from Photovoltaic (PV) panels supplying 0.5V to 2.5V and 30μA to 20mA. You can charge a battery with 3.7V under-voltage protection threshold and 4.2V end of charge voltage threshold. Operating flexibility is possible for a different PV panel and battery with a few easy board changes on the application components.

First start-up at 500mV input
150mV to 4.25V input working voltage range
4.25V end of charge battery voltage
3.7V battery under-voltage protection

Battery Charging & Monitoring, STMicroelectronics