Technical Document
Specifications
Brand
STMicroelectronicsTransistor Type
NPN
Maximum Continuous Collector Current
1.75 A
Maximum Collector Emitter Voltage
80 V
Package Type
PDIP
Mounting Type
Through Hole
Pin Count
16
Transistor Configuration
Common Emitter
Number of Elements per Chip
4
Maximum Collector Emitter Saturation Voltage
1.5 V
Dimensions
20 x 7.1 x 5.1mm
Width
7.1mm
Minimum Operating Temperature
-20 °C
Maximum Operating Temperature
+85 °C
Length
20mm
Height
5.1mm
Product details
Darlington Transistor Arrays, STMicroelectronics
Darlington transistor power drivers are high-voltage, high-current switch arrays containing multiple open-collector Darlington pairs and integral suppression diodes for inductive loads. The high current rating of each output is 500 mA or higher. The inputs are pinned opposite the outputs in the IC package to simplify the application board layout. The interface is standard logic level for TTL or CMOS.
Darlington Transistor Drivers
AED 438.38
AED 17.535 Each (In a Tube of 25) (ex VAT)
AED 460.30
AED 18.412 Each (In a Tube of 25) (inc. VAT)
25
AED 438.38
AED 17.535 Each (In a Tube of 25) (ex VAT)
AED 460.30
AED 18.412 Each (In a Tube of 25) (inc. VAT)
25
Stock information temporarily unavailable.
Please check again later.
Technical Document
Specifications
Brand
STMicroelectronicsTransistor Type
NPN
Maximum Continuous Collector Current
1.75 A
Maximum Collector Emitter Voltage
80 V
Package Type
PDIP
Mounting Type
Through Hole
Pin Count
16
Transistor Configuration
Common Emitter
Number of Elements per Chip
4
Maximum Collector Emitter Saturation Voltage
1.5 V
Dimensions
20 x 7.1 x 5.1mm
Width
7.1mm
Minimum Operating Temperature
-20 °C
Maximum Operating Temperature
+85 °C
Length
20mm
Height
5.1mm
Product details
Darlington Transistor Arrays, STMicroelectronics
Darlington transistor power drivers are high-voltage, high-current switch arrays containing multiple open-collector Darlington pairs and integral suppression diodes for inductive loads. The high current rating of each output is 500 mA or higher. The inputs are pinned opposite the outputs in the IC package to simplify the application board layout. The interface is standard logic level for TTL or CMOS.


