TE Connectivity Straight, Fluid Resistant Elastomer, 17mm
Technical Document
Specifications
Brand
TE ConnectivityType
Straight
Inside Diameter Primary
17mm
Inside Diameter Secondary
17mm
Adhesive Lined
No
Material
Fluid Resistant Elastomer
Number of Breakouts
1
Minimum Operating Temperature
-75°C
Maximum Operating Temperature
+150°C
Shrunk Diameter Primary
6.9mm
Shrunk Diameter Secondary
3mm
Series
202K1
Product details
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.
AED 75.13
AED 75.13 Each (ex VAT)
AED 78.89
AED 78.89 Each (inc. VAT)
1
AED 75.13
AED 75.13 Each (ex VAT)
AED 78.89
AED 78.89 Each (inc. VAT)
1
Stock information temporarily unavailable.
Please check again later.
| Quantity | Unit price |
|---|---|
| 1 - 14 | AED 75.13 |
| 15 - 49 | AED 70.40 |
| 50+ | AED 64.36 |
Technical Document
Specifications
Brand
TE ConnectivityType
Straight
Inside Diameter Primary
17mm
Inside Diameter Secondary
17mm
Adhesive Lined
No
Material
Fluid Resistant Elastomer
Number of Breakouts
1
Minimum Operating Temperature
-75°C
Maximum Operating Temperature
+150°C
Shrunk Diameter Primary
6.9mm
Shrunk Diameter Secondary
3mm
Series
202K1
Product details
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.