TE Connectivity Transparent Polyolefin Solder Sleeve 35.5mm Length 11.5 mm Cable Diameter 4 mm Cable Diameter
Technical Document
Specifications
Brand
TE ConnectivityProduct Type
Solder Sleeve
Sub Type
Terminator
Sleeve Length
35.5mm
Material
Polyolefin
Dielectric Strength
2kV
Minimum Cable Diameter
4mm
Maximum Cable Diameter
11.5mm
Colour
Transparent
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
125°C
Standards/Approvals
ANSI J-STD-004, ANSI J-STD-006
Shrink Temperature
85°C
Series
B-155
Country of Origin
Mexico
Product details
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
Stock information temporarily unavailable.
AED 536.34
AED 21.454 Each (In a Pack of 25) (ex VAT)
AED 563.16
AED 22.527 Each (In a Pack of 25) (inc. VAT)
25
AED 536.34
AED 21.454 Each (In a Pack of 25) (ex VAT)
AED 563.16
AED 22.527 Each (In a Pack of 25) (inc. VAT)
Stock information temporarily unavailable.
25
| Quantity | Unit price | Per Pack |
|---|---|---|
| 25 - 350 | AED 21.454 | AED 536.34 |
| 375 - 1225 | AED 20.384 | AED 509.59 |
| 1250+ | AED 19.314 | AED 482.84 |
Technical Document
Specifications
Brand
TE ConnectivityProduct Type
Solder Sleeve
Sub Type
Terminator
Sleeve Length
35.5mm
Material
Polyolefin
Dielectric Strength
2kV
Minimum Cable Diameter
4mm
Maximum Cable Diameter
11.5mm
Colour
Transparent
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
125°C
Standards/Approvals
ANSI J-STD-004, ANSI J-STD-006
Shrink Temperature
85°C
Series
B-155
Country of Origin
Mexico
Product details
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.