Soler&Palau Floor, Heavy Duty Fan 6700m³/h 3 speed 230 V with plug: Type C - European Plug
Technical Document
Specifications
Brand
Soler&PalauAir Flow
6700m³/h
Fan Type
Floor, Heavy Duty
Number Of Speeds
3
Plug Type
Type C - European Plug
Supply Voltage
230 V
Dimensions
925 x 650 x 560mm
Depth
560mm
Height
925mm
Width
650mm
Maximum Current
2.3A
Country of Origin
Spain
Product details
Unelevent Portable Cooling Fans
A range of industrial cooling fans designed to provide high volumes of air.
The fan casing is formed from heavy gauge rolled sheet steel with the motor support manufactured from steel rod and electro-welded for increased strength. The fan assembly is supported by a robust cold formed tubular steel stand. The whole assembly is protected by cataforesis primer and black polyester paint finish.
Plastic impellers are dynamically balanced and manufactured in a UV stabilised injection moulded plastic. They are also reinforced with fibreglass and are resistant to many chemical and abrasive airstreams.
All models are fitted with robust steel wire finger guards on both the inlet and outlet sides of the fan.
All wiring connections are made via an IP65 rated terminal box fixed to the exterior of the casing and provided with 2 poles On/Off switch.
Features and Benefits
Frame mounted ducted fan
IP65 Protected motors
Class F insulation
Working temperature -40 °C to +70 °C
Thermal protection
Speed controllable
Single phase 230 V @ 50 Hz (capacitor located inside the terminal box)
Stock information temporarily unavailable.
Please check again later.
AED 7,862.40
Each (ex VAT)
AED 8,255.52
Each (inc. VAT)
1
AED 7,862.40
Each (ex VAT)
AED 8,255.52
Each (inc. VAT)
1
Technical Document
Specifications
Brand
Soler&PalauAir Flow
6700m³/h
Fan Type
Floor, Heavy Duty
Number Of Speeds
3
Plug Type
Type C - European Plug
Supply Voltage
230 V
Dimensions
925 x 650 x 560mm
Depth
560mm
Height
925mm
Width
650mm
Maximum Current
2.3A
Country of Origin
Spain
Product details
Unelevent Portable Cooling Fans
A range of industrial cooling fans designed to provide high volumes of air.
The fan casing is formed from heavy gauge rolled sheet steel with the motor support manufactured from steel rod and electro-welded for increased strength. The fan assembly is supported by a robust cold formed tubular steel stand. The whole assembly is protected by cataforesis primer and black polyester paint finish.
Plastic impellers are dynamically balanced and manufactured in a UV stabilised injection moulded plastic. They are also reinforced with fibreglass and are resistant to many chemical and abrasive airstreams.
All models are fitted with robust steel wire finger guards on both the inlet and outlet sides of the fan.
All wiring connections are made via an IP65 rated terminal box fixed to the exterior of the casing and provided with 2 poles On/Off switch.
Features and Benefits
Frame mounted ducted fan
IP65 Protected motors
Class F insulation
Working temperature -40 °C to +70 °C
Thermal protection
Speed controllable
Single phase 230 V @ 50 Hz (capacitor located inside the terminal box)