Technical Document
Specifications
Brand
XylemMaximum Flow Rate
80L/min
Supply Voltage
230 V
Input Connection
3/4 in BSP
Maximum Head
5.5m
Maximum Working Pressure
1.4 bar
Body Material
PP
Coupling Type
Magnetic
Input Power
0.06kW
Maximum Fluid Temperature
+85°C
Input Connection Size
3/4in
Pump Type
Centrifugal
IP Rating
IPX5
Wetted Materials
Alumina (Spindle), PP (Encapsulated Magnet), PP (Housing), PPS (Spindle Housing), Standard EPDM (O-Ring)
Product details
NEMP Magnetically Coupled Pump
Rated for continuous duty and ideally suited for water or chemical transfer and re-circulation applications
Trouble-free pumping of acids and alkalis (subject to chemical compatibility restrictions)
Pump chamber and impeller: Polypropylene with alumina-ceramic shaft/thrust washers, Fluoro-elastomer rubber static O-ring seal, and Graphion impeller bearings
Not self priming; requires a flooded suction of approximately 300mm
Mounting plate offers several fixing options
Can handle fluids from -20 to +80°C with a maximum specific gravity of 1.2
Stock information temporarily unavailable.
Please check again later.
AED 1,971.75
Each (ex VAT)
AED 2,070.34
Each (inc. VAT)
1
AED 1,971.75
Each (ex VAT)
AED 2,070.34
Each (inc. VAT)
1
Technical Document
Specifications
Brand
XylemMaximum Flow Rate
80L/min
Supply Voltage
230 V
Input Connection
3/4 in BSP
Maximum Head
5.5m
Maximum Working Pressure
1.4 bar
Body Material
PP
Coupling Type
Magnetic
Input Power
0.06kW
Maximum Fluid Temperature
+85°C
Input Connection Size
3/4in
Pump Type
Centrifugal
IP Rating
IPX5
Wetted Materials
Alumina (Spindle), PP (Encapsulated Magnet), PP (Housing), PPS (Spindle Housing), Standard EPDM (O-Ring)
Product details
NEMP Magnetically Coupled Pump
Rated for continuous duty and ideally suited for water or chemical transfer and re-circulation applications
Trouble-free pumping of acids and alkalis (subject to chemical compatibility restrictions)
Pump chamber and impeller: Polypropylene with alumina-ceramic shaft/thrust washers, Fluoro-elastomer rubber static O-ring seal, and Graphion impeller bearings
Not self priming; requires a flooded suction of approximately 300mm
Mounting plate offers several fixing options
Can handle fluids from -20 to +80°C with a maximum specific gravity of 1.2