Asco Solenoid Valve, 3 port(s) , NC, 24 V ac, 1/4in
Technical Document
Specifications
Brand
Asco JoucomaticSupply Voltage
24 V ac
Number of Ports
3
Connection Size
1/4in
Connection
1/4 in G Female
Operation
Direct
Default Valve Position
NC
Suitable Applications
Air, Inert Gas, Oil, Water
Type
3/2
Orifice Diameter
2.7mm
Series
374
Body Material
Brass
Maximum Working Pressure
10 bar
Operating Temperature Range
-25 → +60 °C
Maximum Operating Temperature
+60°C
Connection Gender
Female
Minimum Operating Temperature
-25°C
Thread Standard or Connection Type
G
Maximum Opening Time
20ms
Maximum Closing Time
20ms
Flow Factor Kv
0.22m³/h
Country of Origin
France
Product details
374 series direct control 3//2 solenoid valves
374 series 3/2 NC direct control solenoid valves.
Compact and lightweight for easy installation.
No minimum control pressure.
Available with brass or stainless steel body.
Pluggable connectors.
Additional coil may be ordered separately (24 Vac: 656-3232, 230 Vac: 656-3226, 24 Vdc: 656-3383).
3 Way Inert Gases and Fluid Valves
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical Document
Specifications
Brand
Asco JoucomaticSupply Voltage
24 V ac
Number of Ports
3
Connection Size
1/4in
Connection
1/4 in G Female
Operation
Direct
Default Valve Position
NC
Suitable Applications
Air, Inert Gas, Oil, Water
Type
3/2
Orifice Diameter
2.7mm
Series
374
Body Material
Brass
Maximum Working Pressure
10 bar
Operating Temperature Range
-25 → +60 °C
Maximum Operating Temperature
+60°C
Connection Gender
Female
Minimum Operating Temperature
-25°C
Thread Standard or Connection Type
G
Maximum Opening Time
20ms
Maximum Closing Time
20ms
Flow Factor Kv
0.22m³/h
Country of Origin
France
Product details
374 series direct control 3//2 solenoid valves
374 series 3/2 NC direct control solenoid valves.
Compact and lightweight for easy installation.
No minimum control pressure.
Available with brass or stainless steel body.
Pluggable connectors.
Additional coil may be ordered separately (24 Vac: 656-3232, 230 Vac: 656-3226, 24 Vdc: 656-3383).
3 Way Inert Gases and Fluid Valves
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.