Fluke I30S Current Clamp, 30A DC Max, AC/DC Adapter, 20A ac AC Max - UKAS Calibrated
Technical Document
Specifications
Brand
FlukeAdapter Type
AC/DC
Maximum DC Current
30A
Maximum ac Current
20A ac
Best Accuracy
±1% + 2 mA
Resolution
±1 mA
Maximum Conductor Size
19mm
Calibrated
UKAS
Safety Category
CAT III 300V
Connector Type
BNC
Maximum Bandwidth
100kHz
Battery Type
9 V
Battery Life
30 h
Cable Length Extended
2m
Maximum Operating Temperature
+50°C
Minimum Operating Temperature
0°C
Bandwidth
DC → 100kHz
Model Number p
I30S
Safety Category Level
CAT III
Safety Category Voltage
300V
Country of Origin
China
Product details
i30s 30A High Resolution, High Bandwidth Oscilloscope Current Probe
The i30 may be used in conjunction with bench and portable oscilloscopes for accurate non-intrusive ac & dc current measurement.,Applications include: inverters, switch mode power supplies, industrial controllers, automotive leakage currents and other applications requiring accurate isolated current measurement.
Hall effect sensing of a.c. and d.c. current
Power LED warns of low battery by flashing
Zero adjust knob to accommodate offsets
The wide, flat frequency response means this probe exhibits a fast response when measuring current pulses
2.0m flying lead terminated with 50Ω BNC plugs
Designed to meet EN61010-1, EN61010-2-032 installation CAT III 300V
Withstands overloads to 500A
Supplied with
Alkaline PP3 battery, 4mm shrouded plug adaptor and operators manual.
Warning
Use of the probe on uninsulated conductors is limited to 300 V ac rms or dc and frequencies below 1 kHz.
Stock information temporarily unavailable.
Please check again later.
P.O.A.
Calibration type
UKAS Calibration
1
P.O.A.
Calibration type
UKAS Calibration
1
Technical Document
Specifications
Brand
FlukeAdapter Type
AC/DC
Maximum DC Current
30A
Maximum ac Current
20A ac
Best Accuracy
±1% + 2 mA
Resolution
±1 mA
Maximum Conductor Size
19mm
Calibrated
UKAS
Safety Category
CAT III 300V
Connector Type
BNC
Maximum Bandwidth
100kHz
Battery Type
9 V
Battery Life
30 h
Cable Length Extended
2m
Maximum Operating Temperature
+50°C
Minimum Operating Temperature
0°C
Bandwidth
DC → 100kHz
Model Number p
I30S
Safety Category Level
CAT III
Safety Category Voltage
300V
Country of Origin
China
Product details
i30s 30A High Resolution, High Bandwidth Oscilloscope Current Probe
The i30 may be used in conjunction with bench and portable oscilloscopes for accurate non-intrusive ac & dc current measurement.,Applications include: inverters, switch mode power supplies, industrial controllers, automotive leakage currents and other applications requiring accurate isolated current measurement.
Hall effect sensing of a.c. and d.c. current
Power LED warns of low battery by flashing
Zero adjust knob to accommodate offsets
The wide, flat frequency response means this probe exhibits a fast response when measuring current pulses
2.0m flying lead terminated with 50Ω BNC plugs
Designed to meet EN61010-1, EN61010-2-032 installation CAT III 300V
Withstands overloads to 500A
Supplied with
Alkaline PP3 battery, 4mm shrouded plug adaptor and operators manual.
Warning
Use of the probe on uninsulated conductors is limited to 300 V ac rms or dc and frequencies below 1 kHz.