Megger LT300-EN-BS Loop Impendance Tester, Loop Impedance Test Type 2 Wire 550V CAT IV RS Calibration
Technical Document
Specifications
Brand
MeggerTest Equipment Type
Earth Loop Impedance Tester
Calibrated
RSCAL
Loop Impedance Test Type
2 Wire
Maximum Voltage Measurement
550V
Best Loop Test Accuracy
±5%
Safety Category
CAT IV 300V
Display Type
LCD
Battery Type
AA
Power Source
Battery
Weight
980g
Maximum Operating Temperature
+60°C
Width
148mm
Length
203mm
Minimum Operating Temperature
-10°C
Height
78mm
Model Number p
LT300
Safety Category Level
CAT IV
Plug Type
Type G - British 3-pin
Safety Category Voltage
300V
Model Number (p)
LT300
Country of Origin
United Kingdom
Product details
LT300 Loop Tester
The LT300 combines high current-loop testing over a wide range of frequencies and supply voltages with simple operation. This is a HIGH CURRENT ONLY tester, designed for installations where there are no RCDs installed. A two-wire test performs a fast loop impedance measurement at a test current up to 27A, with a resolution of 0.01ohms. Frequency range and operating voltage are wide, allowing for a diverse range of applications up to and including CATIV 550V phase-to-phase. Testing commences automatically as soon as the instrument is connected to the supply. Repeat testing is provided by the TEST button.
High current loop tester
Simple auto start operation
16Hz to 400Hz frequency range
Up to CATIV 300V phase-to-earth (550V phase-to-phase) applications
Optional two-wire lead set available separately, RS stock no. 537-7282
Supplied with
durable hard carry case; BS1363 mains socket test lead; 8 x AA alkaline batteries; instructions.
Stock information temporarily unavailable.
Please check again later.
P.O.A.
Calibration type
RS Calibration
1
P.O.A.
Calibration type
RS Calibration
1
Technical Document
Specifications
Brand
MeggerTest Equipment Type
Earth Loop Impedance Tester
Calibrated
RSCAL
Loop Impedance Test Type
2 Wire
Maximum Voltage Measurement
550V
Best Loop Test Accuracy
±5%
Safety Category
CAT IV 300V
Display Type
LCD
Battery Type
AA
Power Source
Battery
Weight
980g
Maximum Operating Temperature
+60°C
Width
148mm
Length
203mm
Minimum Operating Temperature
-10°C
Height
78mm
Model Number p
LT300
Safety Category Level
CAT IV
Plug Type
Type G - British 3-pin
Safety Category Voltage
300V
Model Number (p)
LT300
Country of Origin
United Kingdom
Product details
LT300 Loop Tester
The LT300 combines high current-loop testing over a wide range of frequencies and supply voltages with simple operation. This is a HIGH CURRENT ONLY tester, designed for installations where there are no RCDs installed. A two-wire test performs a fast loop impedance measurement at a test current up to 27A, with a resolution of 0.01ohms. Frequency range and operating voltage are wide, allowing for a diverse range of applications up to and including CATIV 550V phase-to-phase. Testing commences automatically as soon as the instrument is connected to the supply. Repeat testing is provided by the TEST button.
High current loop tester
Simple auto start operation
16Hz to 400Hz frequency range
Up to CATIV 300V phase-to-earth (550V phase-to-phase) applications
Optional two-wire lead set available separately, RS stock no. 537-7282
Supplied with
durable hard carry case; BS1363 mains socket test lead; 8 x AA alkaline batteries; instructions.